Artec Industries

Artec UD80 APEX Rear Axle Truss TR6982, Jeep Wrangler JL

SKU: artTR6982



Overview

Introducing the APEX Truss by Artec Industries, the next generation of PATENTED axle trusses. This truss offers unparalleled cost savings, enhanced strength, weight reduction, ease of installation, precise fitment, and comprehensive axle protection. Its unique peaked design increases rigidity and reduces weight while eliminating the need for long weld seams.

The Ultimate Dana 80 Bracketless Crate Rear Axle can now be paired with Artec's APEX Truss, providing the ultimate upgrade in performance, dependability, and maximum strength for your Wrangler.

Key Features

  • PATENTED APEX peaked top: Provides greater rigidity compared to flat top designs
  • 1/4 in. mild steel, CNC laser cut: Lightweight yet strong, weighing only 17 lbs
  • CNC precision bent: Ensures easy drop-in fitment, ready for welding
  • 3D models from Dana Corp/SPICER and OEM vehicles: Guarantees a perfect fit and clearance
  • 70% less welding: Reduces warping, speeds up turnaround, and lowers costs
  • Bent long seams: Eliminates the need for time-consuming welding
  • Dimpled holes: Reduces weight while increasing rigidity and strength
  • Low-profile design: Provides optimal link joint mounting geometry
  • Versatile fit: Suitable for use between Leaf Springs or as a base for link suspension mounts
  • Two-piece design: Enables smaller packaging, reduces shipping costs, and simplifies installation

What's Included

  • Artec UD80 APEX Rear Axle Truss (TR6982)

Specifications

Part number TR6982
Vehicle fitment Jeep Wrangler JL
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec TR6982 fit?

Fits 2018-2025 Jeep Wrangler JL models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

View full product details
$175.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

Introducing the APEX Truss by Artec Industries, the next generation of PATENTED axle trusses. This truss offers unparalleled cost savings, enhanced strength, weight reduction, ease of installation, precise fitment, and comprehensive axle protection. Its unique peaked design increases rigidity and reduces weight while eliminating the need for long weld seams.

The Ultimate Dana 80 Bracketless Crate Rear Axle can now be paired with Artec's APEX Truss, providing the ultimate upgrade in performance, dependability, and maximum strength for your Wrangler.

Key Features

  • PATENTED APEX peaked top: Provides greater rigidity compared to flat top designs
  • 1/4 in. mild steel, CNC laser cut: Lightweight yet strong, weighing only 17 lbs
  • CNC precision bent: Ensures easy drop-in fitment, ready for welding
  • 3D models from Dana Corp/SPICER and OEM vehicles: Guarantees a perfect fit and clearance
  • 70% less welding: Reduces warping, speeds up turnaround, and lowers costs
  • Bent long seams: Eliminates the need for time-consuming welding
  • Dimpled holes: Reduces weight while increasing rigidity and strength
  • Low-profile design: Provides optimal link joint mounting geometry
  • Versatile fit: Suitable for use between Leaf Springs or as a base for link suspension mounts
  • Two-piece design: Enables smaller packaging, reduces shipping costs, and simplifies installation

What's Included

  • Artec UD80 APEX Rear Axle Truss (TR6982)

Specifications

Part number TR6982
Vehicle fitment Jeep Wrangler JL
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec TR6982 fit?

Fits 2018-2025 Jeep Wrangler JL models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

Artec UD80 APEX Rear Axle Truss TR6982, Jeep Wrangler JL

$175.99