Yukon Gear & Axle Pinion Preload Solid Spacer and Shim Kit, Front, Jeep Wrangler JL Dana 30
SKU: yukSK CSJK-F
Overview
This solid spacer and shim kit is a crush sleeve eliminator: it sets front pinion bearing preload with a solid spacer and shims instead of a crush sleeve, for a preload setting that stays put.
Key Features
- Crush sleeve eliminator kit
- Solid spacer with shim assortment for pinion preload
- Precision machined, tailored for the application
Specifications
| Type | Solid spacer and shim kit |
| Position | Front pinion |
| UPC | 883584550785 |
Installation
This part installs during differential service or a gear install, with the differential open. Professional installation is recommended for gear setup work: pinion depth, pinion bearing preload, backlash, and carrier preload are measured settings, verified with marking compound, not guesses.
Fitment
Yukon's title for this kit reads: JK/JL Dana 30 and JK Dana 44 front. Read it carefully: the JL coverage is the Dana 30 front axle. The Dana 44 front coverage in the same title is JK, not JL. Yukon states no year range on its page.
Warranty
Covered by a 1-year warranty against manufacturing defects. Yukon's warranty covers the original retail purchaser and requires installation and maintenance in accordance with Yukon's instructions. It does not cover labor or other incidental or consequential damages.
FAQs
Q: Why do the shims and crush sleeve matter?
They set the gear mesh. Carrier preload shims sit on either side of the carrier, and pinion preload is set as the new crush sleeve crushes, which is why a new sleeve is used rather than a reused one. Overshooting pinion preload on a crush-sleeve axle destroys the sleeve and requires a new one.
Q: Is this part a repair in itself, or part of a bigger job?
Seals, shims, crush sleeves, bearings, and small hardware like this are the setup and wear components of a ring and pinion install or differential overhaul; they are the same categories of parts Yukon bundles in its master overhaul kits. A single part is best framed as a service or replacement component for a job that is already open, not as a complete install solution on its own.
Overview
This solid spacer and shim kit is a crush sleeve eliminator: it sets front pinion bearing preload with a solid spacer and shims instead of a crush sleeve, for a preload setting that stays put.
Key Features
- Crush sleeve eliminator kit
- Solid spacer with shim assortment for pinion preload
- Precision machined, tailored for the application
Specifications
| Type | Solid spacer and shim kit |
| Position | Front pinion |
| UPC | 883584550785 |
Installation
This part installs during differential service or a gear install, with the differential open. Professional installation is recommended for gear setup work: pinion depth, pinion bearing preload, backlash, and carrier preload are measured settings, verified with marking compound, not guesses.
Fitment
Yukon's title for this kit reads: JK/JL Dana 30 and JK Dana 44 front. Read it carefully: the JL coverage is the Dana 30 front axle. The Dana 44 front coverage in the same title is JK, not JL. Yukon states no year range on its page.
Warranty
Covered by a 1-year warranty against manufacturing defects. Yukon's warranty covers the original retail purchaser and requires installation and maintenance in accordance with Yukon's instructions. It does not cover labor or other incidental or consequential damages.
FAQs
Q: Why do the shims and crush sleeve matter?
They set the gear mesh. Carrier preload shims sit on either side of the carrier, and pinion preload is set as the new crush sleeve crushes, which is why a new sleeve is used rather than a reused one. Overshooting pinion preload on a crush-sleeve axle destroys the sleeve and requires a new one.
Q: Is this part a repair in itself, or part of a bigger job?
Seals, shims, crush sleeves, bearings, and small hardware like this are the setup and wear components of a ring and pinion install or differential overhaul; they are the same categories of parts Yukon bundles in its master overhaul kits. A single part is best framed as a service or replacement component for a job that is already open, not as a complete install solution on its own.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Artec Industries
Artec 1-Ton - APEX Front SD Differential Top Cap 2005+ JL6501, Jeep Wrangler JL and Gladiator JT

Artec Industries
Artec JL APEX Rear Axle Truss JL4502, Jeep Wrangler JL

Artec Industries
Artec 1-Ton - APEX Front Superduty Swap Kit 1999-2004 JL6542, Johnny Joints, Jeep Wrangler JL and Gladiator JT

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Shaft, Dana 44 (M220), 32 Spline, 33.9 in, Right Hand, Jeep Wrangler JL and Gladiator JT Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Kit, Dana 35 (M200), 29 Spline, 32.3 in, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Replacement Standard Open Spider Gear Kit, Dana 30, 27 Spline

Yukon Gear & Axle
Yukon Gear & Axle Mighty Seal Pinion Seal, Dana 44 (M220) Rear, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 30 (M186) Front and Dana 44 (M220) Rear, 4.56 Ratio, Jeep Wrangler JL Non-Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 44 (M210) Front and Dana 44 (M220) Rear, 4.88 Ratio, Jeep Wrangler JL and Gladiator JT Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 44 (M210) Front and Dana 44 (M220) Rear, 4.56 Ratio, Jeep Wrangler JL and Gladiator JT Rubicon
Yukon Gear & Axle Pinion Preload Solid Spacer and Shim Kit, Front, Jeep Wrangler JL Dana 30
