Artec UD80 APEX Rear Axle Truss TR6982, Jeep Wrangler JL
SKU: artTR6982
Overview
Introducing the APEX Truss by Artec Industries, the next generation of PATENTED axle trusses. This truss offers unparalleled cost savings, enhanced strength, weight reduction, ease of installation, precise fitment, and comprehensive axle protection. Its unique peaked design increases rigidity and reduces weight while eliminating the need for long weld seams.
The Ultimate Dana 80 Bracketless Crate Rear Axle can now be paired with Artec's APEX Truss, providing the ultimate upgrade in performance, dependability, and maximum strength for your Wrangler.
Key Features
- PATENTED APEX peaked top: Provides greater rigidity compared to flat top designs
- 1/4 in. mild steel, CNC laser cut: Lightweight yet strong, weighing only 17 lbs
- CNC precision bent: Ensures easy drop-in fitment, ready for welding
- 3D models from Dana Corp/SPICER and OEM vehicles: Guarantees a perfect fit and clearance
- 70% less welding: Reduces warping, speeds up turnaround, and lowers costs
- Bent long seams: Eliminates the need for time-consuming welding
- Dimpled holes: Reduces weight while increasing rigidity and strength
- Low-profile design: Provides optimal link joint mounting geometry
- Versatile fit: Suitable for use between Leaf Springs or as a base for link suspension mounts
- Two-piece design: Enables smaller packaging, reduces shipping costs, and simplifies installation
What's Included
- Artec UD80 APEX Rear Axle Truss (TR6982)
Specifications
| Part number | TR6982 |
| Vehicle fitment | Jeep Wrangler JL |
| Material | Mild steel |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2018-2025 Jeep Wrangler JL models.
Warranty
Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec TR6982 fit?
Fits 2018-2025 Jeep Wrangler JL models.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What is it made from?
It is built from Mild steel, per Artec.
Q: What warranty covers this part?
Limited Lifetime warranty against defects in materials and workmanship, per Artec.
Overview
Introducing the APEX Truss by Artec Industries, the next generation of PATENTED axle trusses. This truss offers unparalleled cost savings, enhanced strength, weight reduction, ease of installation, precise fitment, and comprehensive axle protection. Its unique peaked design increases rigidity and reduces weight while eliminating the need for long weld seams.
The Ultimate Dana 80 Bracketless Crate Rear Axle can now be paired with Artec's APEX Truss, providing the ultimate upgrade in performance, dependability, and maximum strength for your Wrangler.
Key Features
- PATENTED APEX peaked top: Provides greater rigidity compared to flat top designs
- 1/4 in. mild steel, CNC laser cut: Lightweight yet strong, weighing only 17 lbs
- CNC precision bent: Ensures easy drop-in fitment, ready for welding
- 3D models from Dana Corp/SPICER and OEM vehicles: Guarantees a perfect fit and clearance
- 70% less welding: Reduces warping, speeds up turnaround, and lowers costs
- Bent long seams: Eliminates the need for time-consuming welding
- Dimpled holes: Reduces weight while increasing rigidity and strength
- Low-profile design: Provides optimal link joint mounting geometry
- Versatile fit: Suitable for use between Leaf Springs or as a base for link suspension mounts
- Two-piece design: Enables smaller packaging, reduces shipping costs, and simplifies installation
What's Included
- Artec UD80 APEX Rear Axle Truss (TR6982)
Specifications
| Part number | TR6982 |
| Vehicle fitment | Jeep Wrangler JL |
| Material | Mild steel |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2018-2025 Jeep Wrangler JL models.
Warranty
Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec TR6982 fit?
Fits 2018-2025 Jeep Wrangler JL models.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What is it made from?
It is built from Mild steel, per Artec.
Q: What warranty covers this part?
Limited Lifetime warranty against defects in materials and workmanship, per Artec.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Artec Industries
Artec 1-Ton - APEX Front SD Differential Top Cap 2005+ JL6501, Jeep Wrangler JL and Gladiator JT

Artec Industries
Artec JL APEX Rear Axle Truss JL4502, Jeep Wrangler JL

Artec Industries
Artec 1-Ton - APEX Front Superduty Swap Kit 1999-2004 JL6542, Johnny Joints, Jeep Wrangler JL and Gladiator JT

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Shaft, Dana 44 (M220), 32 Spline, 33.9 in, Right Hand, Jeep Wrangler JL and Gladiator JT Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Kit, Dana 35 (M200), 29 Spline, 32.3 in, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Replacement Standard Open Spider Gear Kit, Dana 30, 27 Spline

Yukon Gear & Axle
Yukon Gear & Axle Pinion Preload Solid Spacer and Shim Kit, Front, Jeep Wrangler JL Dana 30

Yukon Gear & Axle
Yukon Gear & Axle Mighty Seal Pinion Seal, Dana 44 (M220) Rear, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 30 (M186) Front and Dana 44 (M220) Rear, 4.56 Ratio, Jeep Wrangler JL Non-Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 44 (M210) Front and Dana 44 (M220) Rear, 4.88 Ratio, Jeep Wrangler JL and Gladiator JT Rubicon
Artec UD80 APEX Rear Axle Truss TR6982, Jeep Wrangler JL



