Artec Industries

Artec UD60 Front APEX Truss TR6064, Jeep Wrangler JL and Gladiator JT

SKU: artTR6064



Overview

Experience unparalleled rigidity and tube spin prevention with Artec Industries' APEX Truss for your front axle. Our PATENTED axle trusses redefine cost savings, strength, weight savings, installation simplicity, precision fitment, and complete axle protection. The APEX Truss' unique peaked shape top offers increased rigidity, weight reduction, and eliminates long weld seams, preventing weld warping and ensuring consistency.

Artec Industries APEX Truss enhances front axle rigidity and prevents tube spin. Offering cost savings, strength, weight reduction, easy installation, and complete axle protection, it's your axle's ultimate insurance.

Key Features

  • PATENTED APEX peaked top for rigidity
  • Lightweight 3/16 in. mild steel, 7 lbs
  • CNC precision laser cut/bent for fitment
  • Designed with Dana/Jeep 3D models
  • 70% less welding, less warping, lower costs
  • No long seam welding needed
  • Dimpled holes for weight reduction and strength
  • Weldable with MIG, moderate pre/post-heating
  • Prevents axle tube spinning in UD60
  • Strengthens axle's weakest sections

What's Included

  • Artec UD60 Front APEX Truss (TR6064)

Specifications

Part number TR6064
Vehicle fitment Jeep Wrangler JL and Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Wrangler JL and Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec TR6064 fit?

Fits 2020-2025 Jeep Wrangler JL and Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

View full product details
$131.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

Experience unparalleled rigidity and tube spin prevention with Artec Industries' APEX Truss for your front axle. Our PATENTED axle trusses redefine cost savings, strength, weight savings, installation simplicity, precision fitment, and complete axle protection. The APEX Truss' unique peaked shape top offers increased rigidity, weight reduction, and eliminates long weld seams, preventing weld warping and ensuring consistency.

Artec Industries APEX Truss enhances front axle rigidity and prevents tube spin. Offering cost savings, strength, weight reduction, easy installation, and complete axle protection, it's your axle's ultimate insurance.

Key Features

  • PATENTED APEX peaked top for rigidity
  • Lightweight 3/16 in. mild steel, 7 lbs
  • CNC precision laser cut/bent for fitment
  • Designed with Dana/Jeep 3D models
  • 70% less welding, less warping, lower costs
  • No long seam welding needed
  • Dimpled holes for weight reduction and strength
  • Weldable with MIG, moderate pre/post-heating
  • Prevents axle tube spinning in UD60
  • Strengthens axle's weakest sections

What's Included

  • Artec UD60 Front APEX Truss (TR6064)

Specifications

Part number TR6064
Vehicle fitment Jeep Wrangler JL and Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Wrangler JL and Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec TR6064 fit?

Fits 2020-2025 Jeep Wrangler JL and Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

Artec UD60 Front APEX Truss TR6064, Jeep Wrangler JL and Gladiator JT

$131.99