Artec Industries

Artec JT 1-Ton APEX Rear Axle Swap Brackets JT6301, Jeep Gladiator JT

SKU: artJT6301



Overview

The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.

Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.

Key Features

  • In-house se CNC laser cut from ¼" and 3/16 in. mild steel
  • Lightweight and robust
  • Hassle-free installation: Reinforced truss - simply drop it in place and start welding
  • 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
  • 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
  • Dimpled holes provide light weight and rigidity
  • Contours to the differential
  • The truss provides complete end-to-end rigidity
  • Coil bracket and bump stop pads are an extension of the Axle truss
  • The main truss provides fixture points for all suspension brackets for easy installation

What's Included

  • Artec JT 1-Ton APEX Rear Axle Swap Brackets (JT6301)

Specifications

Part number JT6301
Vehicle fitment Jeep Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JT6301 fit?

Fits 2020-2025 Jeep Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

View full product details
$549.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.

Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.

Key Features

  • In-house se CNC laser cut from ¼" and 3/16 in. mild steel
  • Lightweight and robust
  • Hassle-free installation: Reinforced truss - simply drop it in place and start welding
  • 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
  • 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
  • Dimpled holes provide light weight and rigidity
  • Contours to the differential
  • The truss provides complete end-to-end rigidity
  • Coil bracket and bump stop pads are an extension of the Axle truss
  • The main truss provides fixture points for all suspension brackets for easy installation

What's Included

  • Artec JT 1-Ton APEX Rear Axle Swap Brackets (JT6301)

Specifications

Part number JT6301
Vehicle fitment Jeep Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JT6301 fit?

Fits 2020-2025 Jeep Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

Artec JT 1-Ton APEX Rear Axle Swap Brackets JT6301, Jeep Gladiator JT

$549.99