Artec Industries

Artec JL 1-Ton UD80 APEX Rear Axle Swap Kit JL6980, Jeep Wrangler JL

SKU: artJL6980



Overview

The new Ultimate Dana 80 Bracketless Crate Rear Axle is now available to pair with Artec's APEX Truss & Bracket System for your Jeep Wrangler. This combination delivers the ultimate axle swap package for enhanced performance, dependability, and maximum strength.

Key Features

  • Patented APEX peaked top: Enhanced rigidity over flat top designs
  • CNC laser cut & formed: Made from 1/4 in." and 3/16 in. mild steel
  • Lightweight, high strength: Combines durability with ease of handling
  • Hassle-free installation: Reinforced truss, simply drop it in place, clock off cover, and start welding
  • 3D models from Dana Corp/SPICER and OEM vehicle: Ensures a perfect fit and clearance
  • 70% less welding needed: Reduces warping, speeds up turnaround, and lowers costs
  • Contours to the differential: Provides a seamless fit
  • Optional differential truss: Offers complete end-to-end rigidity and suspension upgrade options
  • Coil bracket and bump stop pads: Integrated with the axle truss
  • Main truss fixture points: Simplifies installation of all suspension brackets

What's Included

  • Artec JL 1-Ton UD80 APEX Rear Axle Swap Kit (JL6980)

Specifications

Part number JL6980
Vehicle fitment Jeep Wrangler JL
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL models.

Warranty

The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL6980 fit?

Fits 2018-2025 Jeep Wrangler JL models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.

View full product details
$499.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The new Ultimate Dana 80 Bracketless Crate Rear Axle is now available to pair with Artec's APEX Truss & Bracket System for your Jeep Wrangler. This combination delivers the ultimate axle swap package for enhanced performance, dependability, and maximum strength.

Key Features

  • Patented APEX peaked top: Enhanced rigidity over flat top designs
  • CNC laser cut & formed: Made from 1/4 in." and 3/16 in. mild steel
  • Lightweight, high strength: Combines durability with ease of handling
  • Hassle-free installation: Reinforced truss, simply drop it in place, clock off cover, and start welding
  • 3D models from Dana Corp/SPICER and OEM vehicle: Ensures a perfect fit and clearance
  • 70% less welding needed: Reduces warping, speeds up turnaround, and lowers costs
  • Contours to the differential: Provides a seamless fit
  • Optional differential truss: Offers complete end-to-end rigidity and suspension upgrade options
  • Coil bracket and bump stop pads: Integrated with the axle truss
  • Main truss fixture points: Simplifies installation of all suspension brackets

What's Included

  • Artec JL 1-Ton UD80 APEX Rear Axle Swap Kit (JL6980)

Specifications

Part number JL6980
Vehicle fitment Jeep Wrangler JL
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL models.

Warranty

The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL6980 fit?

Fits 2018-2025 Jeep Wrangler JL models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.

Artec JL 1-Ton UD80 APEX Rear Axle Swap Kit JL6980, Jeep Wrangler JL

$499.99