Artec JL 1-Ton - APEX Rear 14 bolt Truss Swap Kit JL1450, Jeep Wrangler JL
SKU: artJL1450
Overview
The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.
Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.
Key Features
- In-house se CNC laser cut from ¼" and 3/16 in. mild steel
- Lightweight and robust
- Hassle-free installation: Reinforced truss - simply drop it in place and start welding
- 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
- 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
- Dimpled holes provide light weight and rigidity
- Contours to the differential
- The truss provides complete end-to-end rigidity
- Coil bracket and bump stop pads are an extension of the Axle truss
- The main truss provides fixture points for all suspension brackets for easy installation
What's Included
- Artec JL 1-Ton - APEX Rear 14 bolt Truss Swap Kit (JL1450)
Specifications
| Part number | JL1450 |
| Vehicle fitment | Jeep Wrangler JL |
| Material | Mild steel |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2020-2025 Jeep Wrangler JL models.
Warranty
The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec JL1450 fit?
Fits 2020-2025 Jeep Wrangler JL models.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What is it made from?
It is built from Mild steel, per Artec.
Q: What warranty covers this part?
Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.
Overview
The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.
Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.
Key Features
- In-house se CNC laser cut from ¼" and 3/16 in. mild steel
- Lightweight and robust
- Hassle-free installation: Reinforced truss - simply drop it in place and start welding
- 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
- 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
- Dimpled holes provide light weight and rigidity
- Contours to the differential
- The truss provides complete end-to-end rigidity
- Coil bracket and bump stop pads are an extension of the Axle truss
- The main truss provides fixture points for all suspension brackets for easy installation
What's Included
- Artec JL 1-Ton - APEX Rear 14 bolt Truss Swap Kit (JL1450)
Specifications
| Part number | JL1450 |
| Vehicle fitment | Jeep Wrangler JL |
| Material | Mild steel |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2020-2025 Jeep Wrangler JL models.
Warranty
The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec JL1450 fit?
Fits 2020-2025 Jeep Wrangler JL models.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What is it made from?
It is built from Mild steel, per Artec.
Q: What warranty covers this part?
Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Artec Industries
Artec 1-Ton - APEX Front SD Differential Top Cap 2005+ JL6501, Jeep Wrangler JL and Gladiator JT

Artec Industries
Artec JL APEX Rear Axle Truss JL4502, Jeep Wrangler JL

Artec Industries
Artec 1-Ton - APEX Front Superduty Swap Kit 1999-2004 JL6542, Johnny Joints, Jeep Wrangler JL and Gladiator JT

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Shaft, Dana 44 (M220), 32 Spline, 33.9 in, Right Hand, Jeep Wrangler JL and Gladiator JT Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Kit, Dana 35 (M200), 29 Spline, 32.3 in, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Replacement Standard Open Spider Gear Kit, Dana 30, 27 Spline

Yukon Gear & Axle
Yukon Gear & Axle Pinion Preload Solid Spacer and Shim Kit, Front, Jeep Wrangler JL Dana 30

Yukon Gear & Axle
Yukon Gear & Axle Mighty Seal Pinion Seal, Dana 44 (M220) Rear, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 30 (M186) Front and Dana 44 (M220) Rear, 4.56 Ratio, Jeep Wrangler JL Non-Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 44 (M210) Front and Dana 44 (M220) Rear, 4.88 Ratio, Jeep Wrangler JL and Gladiator JT Rubicon
Artec JL 1-Ton - APEX Rear 14 bolt Truss Swap Kit JL1450, Jeep Wrangler JL

