Artec APEX Front Axle Truss, Dana 44 JL4501, Jeep Wrangler JL and Gladiator JT
SKU: artJL4501
Overview
The Artec JL4501 is the APEX front axle truss for the Dana 44 front axle in Jeep Wrangler JL and Gladiator JT models, per the Turn14 listing. It carries Artec's patented APEX peaked-top design, which adds rigidity without long weld seams.
Artec no longer lists this truss on a standalone page; it survives as a component number inside the APEX front axle armor kit, and Artec's current standalone front truss is the JL4507 for the newer 05 casting.
Key Features
- APEX peaked-top truss design for rigidity without long weld seams
- Weld-on installation
- For the Dana 44 front axle
- Also a component of the APEX front axle armor kit
What's Included
- Artec APEX Front Axle Truss, Dana 44 (JL4501)
Specifications
| Part number | JL4501 |
| Vehicle fitment | Jeep Wrangler JL and Gladiator JT |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.
Warranty
Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec JL4501 fit?
Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What warranty covers this part?
Limited Lifetime warranty against defects in materials and workmanship, per Artec.
Overview
The Artec JL4501 is the APEX front axle truss for the Dana 44 front axle in Jeep Wrangler JL and Gladiator JT models, per the Turn14 listing. It carries Artec's patented APEX peaked-top design, which adds rigidity without long weld seams.
Artec no longer lists this truss on a standalone page; it survives as a component number inside the APEX front axle armor kit, and Artec's current standalone front truss is the JL4507 for the newer 05 casting.
Key Features
- APEX peaked-top truss design for rigidity without long weld seams
- Weld-on installation
- For the Dana 44 front axle
- Also a component of the APEX front axle armor kit
What's Included
- Artec APEX Front Axle Truss, Dana 44 (JL4501)
Specifications
| Part number | JL4501 |
| Vehicle fitment | Jeep Wrangler JL and Gladiator JT |
Installation
Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.
Fitment
Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.
Warranty
Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.
FAQs
Q: What does the Artec JL4501 fit?
Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.
Q: Does this require welding?
Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.
Q: What warranty covers this part?
Limited Lifetime warranty against defects in materials and workmanship, per Artec.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Artec Industries
Artec 1-Ton - APEX Front SD Differential Top Cap 2005+ JL6501, Jeep Wrangler JL and Gladiator JT

Artec Industries
Artec JL APEX Rear Axle Truss JL4502, Jeep Wrangler JL

Artec Industries
Artec 1-Ton - APEX Front Superduty Swap Kit 1999-2004 JL6542, Johnny Joints, Jeep Wrangler JL and Gladiator JT

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Shaft, Dana 44 (M220), 32 Spline, 33.9 in, Right Hand, Jeep Wrangler JL and Gladiator JT Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Chromoly Rear Axle Kit, Dana 35 (M200), 29 Spline, 32.3 in, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Replacement Standard Open Spider Gear Kit, Dana 30, 27 Spline

Yukon Gear & Axle
Yukon Gear & Axle Pinion Preload Solid Spacer and Shim Kit, Front, Jeep Wrangler JL Dana 30

Yukon Gear & Axle
Yukon Gear & Axle Mighty Seal Pinion Seal, Dana 44 (M220) Rear, Jeep Wrangler JL

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 30 (M186) Front and Dana 44 (M220) Rear, 4.56 Ratio, Jeep Wrangler JL Non-Rubicon

Yukon Gear & Axle
Yukon Gear & Axle Re-Gear Kit, Dana 44 (M210) Front and Dana 44 (M220) Rear, 4.88 Ratio, Jeep Wrangler JL and Gladiator JT Rubicon
Artec APEX Front Axle Truss, Dana 44 JL4501, Jeep Wrangler JL and Gladiator JT
