Artec Industries

Artec APEX Front Axle Truss, Dana 44 JL4501, Jeep Wrangler JL and Gladiator JT

SKU: artJL4501



Overview

The Artec JL4501 is the APEX front axle truss for the Dana 44 front axle in Jeep Wrangler JL and Gladiator JT models, per the Turn14 listing. It carries Artec's patented APEX peaked-top design, which adds rigidity without long weld seams.

Artec no longer lists this truss on a standalone page; it survives as a component number inside the APEX front axle armor kit, and Artec's current standalone front truss is the JL4507 for the newer 05 casting.

Key Features

  • APEX peaked-top truss design for rigidity without long weld seams
  • Weld-on installation
  • For the Dana 44 front axle
  • Also a component of the APEX front axle armor kit

What's Included

  • Artec APEX Front Axle Truss, Dana 44 (JL4501)

Specifications

Part number JL4501
Vehicle fitment Jeep Wrangler JL and Gladiator JT

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL4501 fit?

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

View full product details
$120.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The Artec JL4501 is the APEX front axle truss for the Dana 44 front axle in Jeep Wrangler JL and Gladiator JT models, per the Turn14 listing. It carries Artec's patented APEX peaked-top design, which adds rigidity without long weld seams.

Artec no longer lists this truss on a standalone page; it survives as a component number inside the APEX front axle armor kit, and Artec's current standalone front truss is the JL4507 for the newer 05 casting.

Key Features

  • APEX peaked-top truss design for rigidity without long weld seams
  • Weld-on installation
  • For the Dana 44 front axle
  • Also a component of the APEX front axle armor kit

What's Included

  • Artec APEX Front Axle Truss, Dana 44 (JL4501)

Specifications

Part number JL4501
Vehicle fitment Jeep Wrangler JL and Gladiator JT

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL4501 fit?

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. Artec's current standalone front truss is the JL4507 (new 05 casting); JL4501 is also named as a component inside the APEX front axle armor kit.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

Artec APEX Front Axle Truss, Dana 44 JL4501, Jeep Wrangler JL and Gladiator JT

$120.99