Artec Industries

Artec 1-Ton - APEX Front Kingpin-Balljoint 60 Swap Kit 1985-1997 JL6533, With Adjustable Truss Upper Link Mount, Jeep Wrangler JL and Gladiator JT

SKU: artJL6533



Overview

The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.

Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.

Key Features

  • In-house CNC laser cut from ¼" and 3/16 in. mild steel
  • Lightweight and robust
  • Hassle-free installation: Reinforced truss - simply drop it in place and start welding
  • 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
  • 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
  • Dimpled holes provide light weight and rigidity
  • Contours to both the cast steel differential
  • Upper Control Arms mount to high-clearance differential bridge; fits bushing or Johnny Joint
  • The truss provides complete end-to-end rigidity by extending under coil buckets to inner C
  • Coil bracket and bump stop pads are an extension of the Axle truss

What's Included

  • Artec 1-Ton - APEX Front Kingpin-Balljoint 60 Swap Kit 1985-1997 (JL6533)

Specifications

Part number JL6533
Vehicle fitment Jeep Wrangler JL and Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL6533 fit?

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

View full product details
$516.99
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The PATENTED APEX Truss system represents the next evolution of Axle trusses from Artec Industries, combining affordability, durability, lightness, and ease of installation to provide unparalleled protection for your Axle. Its innovative peaked top design offers greater rigidity, lower weight, and no long weld seams, streamlining the installation process. The Apex swap kit features multiple enhancements, including improved weldability, less welding distortion, optimized shock bracket locations, and lower & upper control arm mounts, all suggested by our network of trusted dealers and installers.

Artec Industries PATENTED APEX Truss system combines affordability, durability, and ease of installation for unparalleled Axle protection. Innovative peaked top design, optimized shock bracket locations, and factory compatibility.

Key Features

  • In-house CNC laser cut from ¼" and 3/16 in. mild steel
  • Lightweight and robust
  • Hassle-free installation: Reinforced truss - simply drop it in place and start welding
  • 3D models from Dana Corp and vehicle OEM for perfect fit and clearance
  • 70% less welding needed than previous designs for less warping, faster turnaround, lower costs
  • Dimpled holes provide light weight and rigidity
  • Contours to both the cast steel differential
  • Upper Control Arms mount to high-clearance differential bridge; fits bushing or Johnny Joint
  • The truss provides complete end-to-end rigidity by extending under coil buckets to inner C
  • Coil bracket and bump stop pads are an extension of the Axle truss

What's Included

  • Artec 1-Ton - APEX Front Kingpin-Balljoint 60 Swap Kit 1985-1997 (JL6533)

Specifications

Part number JL6533
Vehicle fitment Jeep Wrangler JL and Gladiator JT
Material Mild steel

Installation

Weld-on installation. This is a fabrication install, not a bolt-on. Artec's APEX instructions call for welding and general fabrication skills: the cast section is preheated to about 400 degrees F and slow-cooled for 18 to 24 hours wrapped in a welding blanket. The APEX peaked design needs about 70% less welding than Artec's previous designs. Have a qualified off-road shop do the install if you are not set up for fabrication. Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models.

Warranty

Covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Finishes and coatings, including powder coat, are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JL6533 fit?

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models.

Q: Does this require welding?

Yes. This is a weld-on fabrication install. Artec's APEX instructions call for preheating the cast section to about 400 degrees F and slow-cooling it for 18 to 24 hours in a welding blanket.

Q: What is it made from?

It is built from Mild steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime warranty against defects in materials and workmanship, per Artec.

Artec 1-Ton - APEX Front Kingpin-Balljoint 60 Swap Kit 1985-1997 JL6533, With Adjustable Truss Upper Link Mount, Jeep Wrangler JL and Gladiator JT

$516.99