RockJock High-Steer Steering Knuckles RJ-447100-101, Ductile Iron, Jeep Wrangler JL and Gladiator JT
SKU: rokRJ-447100-101
Overview
The RockJock RJ-447100-101 high-steer knuckles replace the factory steering knuckles on the Jeep Wrangler JL and Gladiator JT and move the steering linkage up out of harm's way: the tie rod rises 2 3/4 in. and the drag link rises 2 1/2 in. compared with the stock knuckles. That extra clearance keeps the tie rod and drag link off rocks and ledges, and the raised geometry is the foundation of a RockJock high-steer conversion.
The castings are 65-45-12 ductile iron, and they are designed to work with the Jeep's factory inner C-knuckles while retaining the factory unit bearings, axle shafts, ball joints, and brakes. Extra threaded steering-stop holes are cast in. RockJock's Media Hub notes these knuckles were chosen Best Gear of Overland Expo SoCal 2025.
Key Features
- Raise the tie rod 2 3/4 in. and the drag link 2 1/2 in. over stock knuckle geometry
- 65-45-12 ductile iron castings
- Retain factory unit bearings, axle shafts, ball joints, and brakes
- Work with the factory inner C-knuckles
- Extra threaded steering-stop holes
- Bolt-on high-steer conversion with no machining of the knuckles
What's Included
- High-steer steering knuckles (pair)
Specifications
| Part number | RJ-447100-101 |
| Material | 65-45-12 ductile iron |
| Tie rod rise | 2 3/4 in. over stock |
| Drag link rise | 2 1/2 in. over stock |
| Wheel requirement | 17 in. minimum, up to 6 in. backspacing |
Installation
Bolt-on high-steer conversion; no machining of the knuckles is required. Retailer listings describe the knuckle install as roughly an afternoon job. Pairing rule from RockJock: a wide axle with these knuckles uses tie rod RJ-442101-101, while a narrow axle uses tie rod RJ-442101-103.
Fitment
Fits Jeep Wrangler JL, Wrangler JL Unlimited, and Gladiator JT. The knuckles require the factory inner C-knuckles, a minimum 17 in. wheel, and up to 6 in. of wheel backspacing.
Warranty
Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.
FAQs
Q: Do these knuckles work with my factory brakes and unit bearings?
Yes. RockJock designed the castings to retain the factory unit bearings, axle shafts, ball joints, and brakes.
Q: Which tie rod do I pair with these knuckles?
On a wide axle, use tie rod RJ-442101-101. On a narrow axle, use RJ-442101-103.
Q: Is any machining required?
No. The conversion is bolt-on and the knuckles need no machining.
Overview
The RockJock RJ-447100-101 high-steer knuckles replace the factory steering knuckles on the Jeep Wrangler JL and Gladiator JT and move the steering linkage up out of harm's way: the tie rod rises 2 3/4 in. and the drag link rises 2 1/2 in. compared with the stock knuckles. That extra clearance keeps the tie rod and drag link off rocks and ledges, and the raised geometry is the foundation of a RockJock high-steer conversion.
The castings are 65-45-12 ductile iron, and they are designed to work with the Jeep's factory inner C-knuckles while retaining the factory unit bearings, axle shafts, ball joints, and brakes. Extra threaded steering-stop holes are cast in. RockJock's Media Hub notes these knuckles were chosen Best Gear of Overland Expo SoCal 2025.
Key Features
- Raise the tie rod 2 3/4 in. and the drag link 2 1/2 in. over stock knuckle geometry
- 65-45-12 ductile iron castings
- Retain factory unit bearings, axle shafts, ball joints, and brakes
- Work with the factory inner C-knuckles
- Extra threaded steering-stop holes
- Bolt-on high-steer conversion with no machining of the knuckles
What's Included
- High-steer steering knuckles (pair)
Specifications
| Part number | RJ-447100-101 |
| Material | 65-45-12 ductile iron |
| Tie rod rise | 2 3/4 in. over stock |
| Drag link rise | 2 1/2 in. over stock |
| Wheel requirement | 17 in. minimum, up to 6 in. backspacing |
Installation
Bolt-on high-steer conversion; no machining of the knuckles is required. Retailer listings describe the knuckle install as roughly an afternoon job. Pairing rule from RockJock: a wide axle with these knuckles uses tie rod RJ-442101-101, while a narrow axle uses tie rod RJ-442101-103.
Fitment
Fits Jeep Wrangler JL, Wrangler JL Unlimited, and Gladiator JT. The knuckles require the factory inner C-knuckles, a minimum 17 in. wheel, and up to 6 in. of wheel backspacing.
Warranty
Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.
FAQs
Q: Do these knuckles work with my factory brakes and unit bearings?
Yes. RockJock designed the castings to retain the factory unit bearings, axle shafts, ball joints, and brakes.
Q: Which tie rod do I pair with these knuckles?
On a wide axle, use tie rod RJ-442101-101. On a narrow axle, use RJ-442101-103.
Q: Is any machining required?
No. The conversion is bolt-on and the knuckles need no machining.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

RockJock
RockJock Front Spring Tower Plugs RJ-600003-101, Delrin, Jeep Wrangler JL, Gladiator JT and Wrangler JK

RockJock
RockJock Steering Stabilizer Tie Rod Bracket RJ-401001-101, Forged Chromoly, for 42mm Currectlync Tie Rods

RockJock
RockJock Front Brake Hose Relocation Bracket Kit RJ-141300-101, Jeep Wrangler JL and Gladiator JT

RockJock
RockJock Adjustable Front Bump Stop Kit RJ-107101-101, Jeep Wrangler JL, Gladiator JT and Wrangler JK, Not for JT Mojave

RockJock
RockJock Front Bump Stop Kit RJ-107102-101, 2 in. Frame-Mounted, Jeep Wrangler JL, Gladiator JT and Wrangler JK, Not for JT Mojave

RockJock
RockJock Front Bump Stop Kit RJ-140100-101, 1 in. Billet Spacers, Jeep Wrangler JL, Gladiator JT and Wrangler JK

RockJock
RockJock Rear Bump Stop Kit CE-9818RBSK, 3 in. Billet Spacers, Jeep Wrangler JL Only

RockJock
RockJock Front Bump Stop Kit CE-9818FBSK, 3 in. Billet Spacers, Jeep Wrangler JL and Gladiator JT

RockJock
RockJock Rear Trac Bar Geometry Correction Bracket RJ-141403-101, Jeep Wrangler JL 392 Only

RockJock
RockJock Rear Trac Bar Geometry Correction Bracket RJ-141402-101, Jeep Wrangler JL, Excludes 392
RockJock High-Steer Steering Knuckles RJ-447100-101, Ductile Iron, Jeep Wrangler JL and Gladiator JT






