RockJock

RockJock Adjustable Front Bump Stop Kit RJ-107101-101, Jeep Wrangler JL, Gladiator JT and Wrangler JK, Not for JT Mojave

SKU: rokRJ-107101-101



Overview

The RockJock RJ-107101-101 is a frame-mounted (upper) adjustable front bump stop kit for JL, JT, and JK frames. Billet aluminum bodies take 5/16 in. thick steel shims that can be added or subtracted to fine tune bump stop height with the assemblies still on the vehicle: hold the upper bolt with a socket, loosen the body with the supplied spanner wrench, change the shims, and retighten. Never add more than the 4 shims provided per side.

The factory yellow jounce bumper is retained and relocated into the bottom of the aluminum body. The kit is intended for 2 1/2 in. of lift and greater, and it fits the upper bump stop cup on all factory JL, JT, and JK frames.

Key Features

  • Adjustable bump stop height with shim stacks, tunable on the vehicle
  • Frame-mounted (upper) design fits all factory JL, JT, and JK frames
  • Retains and relocates the factory jounce bumper
  • Billet aluminum bodies, clear anodize, zinc plated spacers and bolts
  • Spanner wrench included for adjustments
  • Intended for 2 1/2 in. of lift and greater

What's Included

  • (2) bump stop spacer upper halves
  • (2) bump stop spacer lower halves
  • (8) 5/16 in. steel shims
  • (2) M12-1.75 x 50mm flanged hex bolts
  • (1) spanner wrench
  • Note: factory jounce bumpers are NOT included; reuse the stock bumpers (Mopar PN 68480876AA)

Specifications

Part number RJ-107101-101
Adjustment 5/16 in. steel shims, max 4 per side
Lift range 2 1/2 in. and greater
Material Billet aluminum, clear anodize
Exclusion Not for JT Mojave

Installation

Frame-mounted installation. Shim changes are made on the vehicle with the supplied spanner wrench. Per RockJock, JL and JT Diesel, JL 392, and JL Extreme Recon models have unique factory bump stop configurations: this kit can be used on them, but it should not be stacked with the stock spacers, and it is generally only needed on them with a large amount of lift and much larger tires (40s and 42s). On aftermarket axles, account for any difference in bump stop pad height.

Fitment

Fits Jeep Wrangler JL (2-door), Wrangler JL Unlimited (4-door), Gladiator JT, and Wrangler JK and Unlimited, on factory frames, intended for 2 1/2 in. of lift and greater. It CAN be used on JL 392, JL/JT Diesel, and Extreme Recon models with the stacking caveat in the Installation section. NOT for use with the JT Mojave.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Can I adjust it without removing it?

Yes. The shim stacks change with the assemblies on the vehicle, using the supplied spanner wrench. Do not add more than the 4 provided shims per side.

Q: Does it fit the 392?

Yes, with caveats: RockJock says the kit can be used on the JL 392, Diesel, and Extreme Recon models, but not stacked with the stock spacers, and it is generally only needed there with large lifts and 40 or 42 in. tires.

Q: Are the jounce bumpers included?

No. The factory jounce bumpers are reused (Mopar PN 68480876AA).

View full product details
$322
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The RockJock RJ-107101-101 is a frame-mounted (upper) adjustable front bump stop kit for JL, JT, and JK frames. Billet aluminum bodies take 5/16 in. thick steel shims that can be added or subtracted to fine tune bump stop height with the assemblies still on the vehicle: hold the upper bolt with a socket, loosen the body with the supplied spanner wrench, change the shims, and retighten. Never add more than the 4 shims provided per side.

The factory yellow jounce bumper is retained and relocated into the bottom of the aluminum body. The kit is intended for 2 1/2 in. of lift and greater, and it fits the upper bump stop cup on all factory JL, JT, and JK frames.

Key Features

  • Adjustable bump stop height with shim stacks, tunable on the vehicle
  • Frame-mounted (upper) design fits all factory JL, JT, and JK frames
  • Retains and relocates the factory jounce bumper
  • Billet aluminum bodies, clear anodize, zinc plated spacers and bolts
  • Spanner wrench included for adjustments
  • Intended for 2 1/2 in. of lift and greater

What's Included

  • (2) bump stop spacer upper halves
  • (2) bump stop spacer lower halves
  • (8) 5/16 in. steel shims
  • (2) M12-1.75 x 50mm flanged hex bolts
  • (1) spanner wrench
  • Note: factory jounce bumpers are NOT included; reuse the stock bumpers (Mopar PN 68480876AA)

Specifications

Part number RJ-107101-101
Adjustment 5/16 in. steel shims, max 4 per side
Lift range 2 1/2 in. and greater
Material Billet aluminum, clear anodize
Exclusion Not for JT Mojave

Installation

Frame-mounted installation. Shim changes are made on the vehicle with the supplied spanner wrench. Per RockJock, JL and JT Diesel, JL 392, and JL Extreme Recon models have unique factory bump stop configurations: this kit can be used on them, but it should not be stacked with the stock spacers, and it is generally only needed on them with a large amount of lift and much larger tires (40s and 42s). On aftermarket axles, account for any difference in bump stop pad height.

Fitment

Fits Jeep Wrangler JL (2-door), Wrangler JL Unlimited (4-door), Gladiator JT, and Wrangler JK and Unlimited, on factory frames, intended for 2 1/2 in. of lift and greater. It CAN be used on JL 392, JL/JT Diesel, and Extreme Recon models with the stacking caveat in the Installation section. NOT for use with the JT Mojave.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Can I adjust it without removing it?

Yes. The shim stacks change with the assemblies on the vehicle, using the supplied spanner wrench. Do not add more than the 4 provided shims per side.

Q: Does it fit the 392?

Yes, with caveats: RockJock says the kit can be used on the JL 392, Diesel, and Extreme Recon models, but not stacked with the stock spacers, and it is generally only needed there with large lifts and 40 or 42 in. tires.

Q: Are the jounce bumpers included?

No. The factory jounce bumpers are reused (Mopar PN 68480876AA).

RockJock Adjustable Front Bump Stop Kit RJ-107101-101, Jeep Wrangler JL, Gladiator JT and Wrangler JK, Not for JT Mojave

$322