RockJock

RockJock Currectlync Steering System RJ-442100-101, 42mm Tie Rod and Forged Drag Link, Jeep Wrangler JL and Gladiator JT

SKU: rokRJ-442100-101



Overview

The RockJock RJ-442100-101 Currectlync Steering System is the complete heavy-duty steering upgrade for the Jeep Wrangler JL and Gladiator JT: a 42mm alloy steel tie rod, a solid forged drag link, forged greasable rod ends, and both steering stabilizer brackets in one kit. Vivid Racing's listing for this system family describes the forged steel rod ends as comparable in size to those found on modern 1-ton trucks, and Off Road Xtreme documented an install of the JL Currectlync system on their 2018 JL Wrangler Project Bugout build.

Both rods carry double adjusters, so toe and drag link centering adjust on the vehicle without removing the rods. The system works with stock knuckles or with RockJock high-steer knuckles, on stock height Jeeps and lifts up to 6 in., and with any OEM wheel and tire.

Key Features

  • 42mm (1.654 in.) alloy steel tie rod
  • Solid forged, organically shaped drag link
  • Forged, greasable rod ends throughout
  • Double adjusters on both rods: toe and drag link centering adjust without removing the rods
  • Includes the stabilizer high-mount relocation bracket (RJ-441102-101) and the forged 4130 stabilizer tie rod bracket (RJ-401001-101)
  • Works with stock knuckles or RockJock high-steer knuckles, up to 6 in. of lift
  • 2-year warranty stated by RockJock for this kit

What's Included

  • Tie rod (RJ-442101-101)
  • Drag link (RJ-442103-101)
  • Tie rod tube (RJ-STRG-1801)
  • Rod ends: RJ-STRG-0211 (driver tie rod), RJ-STRG-0212 (passenger tie rod), RJ-STRG-0201 (drag link at pitman arm), RJ-STRG-0202-T (drag link at knuckle)
  • Rod end boot (JK-9703DLB)
  • Steering stabilizer high-mount relocation bracket (RJ-441102-101)
  • Forged 4130 steering stabilizer tie rod bracket (RJ-401001-101)

Specifications

Part number RJ-442100-101
Tie rod 42mm (1.654 in.) alloy steel
Drag link Solid forged steel
Rod ends Forged steel, greasable
Lift range Stock height to 6 in. of lift

Installation

Bolt-on to the factory steering tapers only: enlarged or drilled-out tapers are no longer a bolt-on fit. Grease the rod ends before use with non-synthetic hi-moly grease (RockJock CE-9013G). Stabilizer bracket bump stop minimums over stock: gas 3.6, 2.0T, Mojave, and 4xe models need 1 7/8 in. of added bump stop with the factory stabilizer shock and dust shield fitted (1 3/8 in. without the shield); EcoDiesel needs 7/8 in. (3/8 in. without the shield); the 392 needs no added bump stop.

Fitment

Fits Jeep Wrangler JL (2-door), Wrangler JL Unlimited, and Gladiator JT, all models, with stock knuckles or RockJock high-steer knuckles, and any OEM wheel and tire. The system bolts to factory steering tapers only.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Can I adjust toe without removing the tie rod?

Yes. Both the tie rod and the drag link have double adjusters, so toe and drag link centering are set on the vehicle.

Q: Does it work with high-steer knuckles?

Yes. The system fits stock knuckles and RockJock high-steer knuckles, at stock height and on lifts up to 6 in.

Q: What grease do the rod ends need?

Non-synthetic hi-moly grease, such as RockJock CE-9013G. Grease the ends before first use.

View full product details
$854
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The RockJock RJ-442100-101 Currectlync Steering System is the complete heavy-duty steering upgrade for the Jeep Wrangler JL and Gladiator JT: a 42mm alloy steel tie rod, a solid forged drag link, forged greasable rod ends, and both steering stabilizer brackets in one kit. Vivid Racing's listing for this system family describes the forged steel rod ends as comparable in size to those found on modern 1-ton trucks, and Off Road Xtreme documented an install of the JL Currectlync system on their 2018 JL Wrangler Project Bugout build.

Both rods carry double adjusters, so toe and drag link centering adjust on the vehicle without removing the rods. The system works with stock knuckles or with RockJock high-steer knuckles, on stock height Jeeps and lifts up to 6 in., and with any OEM wheel and tire.

Key Features

  • 42mm (1.654 in.) alloy steel tie rod
  • Solid forged, organically shaped drag link
  • Forged, greasable rod ends throughout
  • Double adjusters on both rods: toe and drag link centering adjust without removing the rods
  • Includes the stabilizer high-mount relocation bracket (RJ-441102-101) and the forged 4130 stabilizer tie rod bracket (RJ-401001-101)
  • Works with stock knuckles or RockJock high-steer knuckles, up to 6 in. of lift
  • 2-year warranty stated by RockJock for this kit

What's Included

  • Tie rod (RJ-442101-101)
  • Drag link (RJ-442103-101)
  • Tie rod tube (RJ-STRG-1801)
  • Rod ends: RJ-STRG-0211 (driver tie rod), RJ-STRG-0212 (passenger tie rod), RJ-STRG-0201 (drag link at pitman arm), RJ-STRG-0202-T (drag link at knuckle)
  • Rod end boot (JK-9703DLB)
  • Steering stabilizer high-mount relocation bracket (RJ-441102-101)
  • Forged 4130 steering stabilizer tie rod bracket (RJ-401001-101)

Specifications

Part number RJ-442100-101
Tie rod 42mm (1.654 in.) alloy steel
Drag link Solid forged steel
Rod ends Forged steel, greasable
Lift range Stock height to 6 in. of lift

Installation

Bolt-on to the factory steering tapers only: enlarged or drilled-out tapers are no longer a bolt-on fit. Grease the rod ends before use with non-synthetic hi-moly grease (RockJock CE-9013G). Stabilizer bracket bump stop minimums over stock: gas 3.6, 2.0T, Mojave, and 4xe models need 1 7/8 in. of added bump stop with the factory stabilizer shock and dust shield fitted (1 3/8 in. without the shield); EcoDiesel needs 7/8 in. (3/8 in. without the shield); the 392 needs no added bump stop.

Fitment

Fits Jeep Wrangler JL (2-door), Wrangler JL Unlimited, and Gladiator JT, all models, with stock knuckles or RockJock high-steer knuckles, and any OEM wheel and tire. The system bolts to factory steering tapers only.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Can I adjust toe without removing the tie rod?

Yes. Both the tie rod and the drag link have double adjusters, so toe and drag link centering are set on the vehicle.

Q: Does it work with high-steer knuckles?

Yes. The system fits stock knuckles and RockJock high-steer knuckles, at stock height and on lifts up to 6 in.

Q: What grease do the rod ends need?

Non-synthetic hi-moly grease, such as RockJock CE-9013G. Grease the ends before first use.

RockJock Currectlync Steering System RJ-442100-101, 42mm Tie Rod and Forged Drag Link, Jeep Wrangler JL and Gladiator JT

$854