ORACLE Lighting 20W LED Fog Lights White Halo Jeep Wrangler JL & Gladiator JT Sport | 5847-001

Overview

The ORACLE Lighting High Performance 20W LED Fog Light Assembly (Part# 5847-001) is a complete, direct-fit replacement fog light set engineered specifically for the Jeep Wrangler JL and Gladiator JT Sport and Sport S trims. Delivering approximately 3,000 raw lumens through premium Philips ZES LED technology, these fog lights offer a dramatic upgrade over dim factory halogen units — giving off-road adventurers and daily drivers alike a crisp, no-glare beam that illuminates both on-road and off-road terrain. The included pre-installed white SMD halo ring adds a bold, distinctive look that complements ORACLE headlights and other lighting accessories.

Key Features & Benefits

• ~3,000 Raw Lumens Output — Philips ZES 5W LED chips push approximately 3,000 raw lumens (1,600 rated lumens), delivering brilliant, high-intensity illumination that far outclasses factory halogen fog lights.
• Philips Luxeon ZES LED Technology — Upgraded from Cree LEDs to Philips Luxeon ZES chips, delivering a 130 LM/W high-efficacy ratio with lower thermal output for longer lifespan and more consistent performance.
• Precision "No Glare" Beam Pattern — Advanced optics design creates a precise fog/spot beam that maximizes road visibility without blinding oncoming drivers or causing distracting scatter.
• Pre-Installed White SMD Halo Ring — The signature ORACLE halo is factory-installed and ready to illuminate out of the box, adding a sleek, modern aesthetic to your Jeep's front end.
• True Plug & Play Installation — Includes H10/9145/5202-compatible plug adapters for a direct, no-cut, no-splice fit into the factory fog light wiring harness — most installs completed in approximately 1 hour.
• Vertical Beam Adjustability — On-vehicle beam angle adjustment ensures optimal light placement for your specific driving environment and lift configuration.
• IP67 Waterproof & Epoxy-Sealed Electronics — Rugged polycarbonate housing withstands trail impacts; solid-state design resists vibration; fully epoxy-sealed electronics block moisture and corrosion in the worst conditions.
• Constant Current LED Driver (Latest Revision) — An upgraded constant current LED driver on the main circuit board conditions power to the LEDs, preventing degradation and extending overall product lifespan.
• Wide Input Voltage Range (9–36V Light / 12–24V Halo) — SMD halos operate across a wide voltage range so voltage spikes cannot damage the LEDs — ideal for vehicles with aftermarket electrical accessories.
• ORACLE Authentication Embossed Bezel — ORACLE Lighting authentication mark is embossed on the inner lamp bezel, ensuring product authenticity and protecting against counterfeits.
• 2-Year Manufacturer Warranty — Backed by ORACLE Lighting's 2-year warranty for worry-free ownership.

What's Included

• 2x ORACLE High Performance 20W LED Fog Lights (White SMD Halo Pre-Installed)
• 2x Plug & Play Wiring Adapters (H10/9145/5202)

Specifications

Manufacturer Part #	5847-001
SKU	ORL5847-001
UPC	810030393122
Wattage	20W
Raw Lumens	~3,000 lm
Rated Output	1,600 lm
LED Chip	Philips Luxeon ZES 5W
LED Efficacy	130 LM/W
Beam Type	Fog / Spot — No Glare
Beam Adjustability	Vertical
Halo Color	White SMD
Bezel Color	Black
Housing Material	Polycarbonate
Electronics Seal	Epoxy-Sealed (IP67)
Input Voltage (Light)	9–36V
Input Voltage (Halo)	12–24V
Current Draw	2.0A @ 12V
Plug Type	H10 / 9145 / 5202
Warranty	2 Years
Quantity	Pair (2 lights)

Fitment & Compatibility

⚠ IMPORTANT FITMENT NOTE: This part ONLY fits Jeep Wrangler JL Sport and Sport S trims, and Jeep Gladiator JT Sport and Sport S trims. Sahara, Overland, Rubicon, and other trims require Part# 5846. Gladiator JT Sport models equipped with the Tow Package also require Part# 5846.

Year Range	Make	Model	Compatible Trims
2018–2026	Jeep	Wrangler JL	Sport, Sport S
2018–2026	Jeep	Wrangler JL	Unlimited Sport, Unlimited Sport S
2021–2023	Jeep	Wrangler JL	Unlimited Sport Altitude
2020–2026	Jeep	Gladiator JT	Sport, Sport S
2021–2023	Jeep	Gladiator JT	Willys Sport

Not compatible with: Wrangler JL Sahara, Overland, Rubicon, or Gladiator JT Sport w/ Tow Package — use Part# 5846 for those trims.

Installation

Installation is a true plug-and-play process using the included H10/9145/5202 wiring adapters — no cutting or splicing of factory wiring required. Most installations are completed in approximately 1 hour. Access to the fog light housing is achieved by pulling back the inner fender liner; bumper removal is not required. Vertical beam adjustability allows for easy aiming after installation. Halo Wiring Note: The DRL wire cannot be used as a power source for the white halo. Tap into the park light circuit for manual daytime control, or use fuse F52 in the engine compartment fuse panel for full automatic halo control. For best results, pair with ORACLE Oculus headlights for a complete, matched LED lighting system.

Frequently Asked Questions

Will these fit my Jeep Wrangler JL Rubicon? No — the 5847-001 is engineered exclusively for JL/JT Sport and Sport S trims. Rubicon, Sahara, and Overland owners should order Part# 5846.

Do these require any wiring modification? No. The included plug-and-play adapters mate directly with the factory fog light harness. No cutting or splicing is required for the fog light function. Minor additional wiring may be needed for the halo.

Are these lights water and weather resistant? Yes. The IP67-rated, epoxy-sealed electronics and polycarbonate housing protect against water ingress, mud, dust, and trail debris.

What halo colors are available? The 5847-001 includes a white halo. Other halo options in the 5847 family include Blue (5847-002), Red (5847-003), Green (5847-004), Amber (5847-005), ColorSHIFT® (5847-334), and No Halo (5847-504).