DV8 Offroad TCJL-14 Body Mounted Tire Carrier - 2018-2025 Jeep Wrangler JL

Overview

The DV8 Offroad Body Mounted Tube-Style Tire Carrier (TCJL-14) is the ultimate spare tire solution for 2018–2025 Jeep Wrangler JL owners who run oversized off-road tires. Engineered to transfer the weight of heavy spare tires completely off the factory door hinges and onto the vehicle's body structure, this carrier eliminates the number-one cause of premature tailgate wear. Whether you're building the best body mounted tire carrier setup for your JL or simply need a reliable way to carry a 40-inch spare, the TCJL-14 delivers factory-quality engineering with serious trail-ready performance.

Key Features & Benefits

• Body-Mounted Tube-Style Design — Mounts directly to the Jeep's body structure instead of the tailgate, distributing the weight of oversized tires/wheels away from factory door hinges for superior long-term durability.
• Elevated Tire Position — Positions the spare tire higher than the factory location, enhancing rear departure angles when running larger tires off-road — a critical advantage on technical trails.
• Fits Up to 40 x 13.50 Tires (-25 Max Offset) — Accommodates the most popular oversized aftermarket tire sizes, so your spare always matches your trail setup.
• Adjustable Cam Nut — Fine-tune the carrier for a precise, rattle-free fit across a wide range of tire sizes and wheel configurations.
• Lock-Ready Spare Tire Mount — Features a dedicated padlock hole on the tire mount so you can secure your spare against theft with any standard padlock (not included).
• (2) Integrated Whip / Antenna Mounts — Built-in mounting points for trail communication whips or CB antenna, keeping your rig ready for group runs and overlanding.
• Hidden Wiring Channels & Zip-Tie Tabs — Routed wire management keeps license plate light wiring and accessory wiring clean, organized, and protected from trail debris.
• Micro-Texture Black Powder Coat Finish — Corrosion-resistant, scratch-resistant finish shields against rust and environmental wear while complementing the aggressive look of any JL build.
• Heavy-Duty Multi-Gauge Steel Construction — Built from 3mm, 4mm, and 5mm steel with a 1.75" tube diameter for a perfect balance of strength and weight.
• Protects Factory Rear Components — By removing strain from the tailgate, this carrier extends the lifespan of OEM hinges, latches, and other rear hardware.

What's Included

• 1x DV8 Offroad Body Mounted Tire Carrier (TCJL-14)
• All necessary mounting hardware
• Installation guide (also available as PDF download from DV8 Offroad)

Specifications

Manufacturer Part #	TCJL-14
UPC	810087816711
Material	3mm, 4mm, and 5mm Steel; 1.75" tube diameter
Finish	Micro-Texture Black Powder Coat
Max Tire Size	40 x 13.50
Max Wheel Offset	-25
Mount Type	Body Mounted
Whip / Antenna Mounts	2 Included
Weight	114 lbs
Package Dimensions	30" W x 30" H x 13" L
Warranty	1 Year Limited (DV8 Offroad)
California Prop 65	⚠️ Warning: See Prop 65 notice below

⚠️ Prop 65 Warning: This product can expose you to chemicals including lead, lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Fitment & Compatibility

The DV8 Offroad TCJL-14 Body Mounted Tire Carrier is designed to fit 2018–2025 Jeep Wrangler JL — All Trims (2-Door & 4-Door Unlimited), including Sport, Sport S, Sahara, Rubicon, Moab, and Altitude editions.

• 2018 Jeep Wrangler JL / JLU (confirm JL, not JK)
• 2019–2025 Jeep Wrangler JL / JLU — All Trims

Important Fitment Notes:

• Maximum supported tire size is 40 x 13.50 with a -25 max offset.
• This is a body-mounted carrier — it does NOT replace the factory tailgate hinge or bumper.
• Not compatible with vehicles equipped with the Mopar On-Board Air Compressor.
• If your 2018 model was built in late 2017, confirm you have the JL generation, not the JK.
• Cross-reference OEM part numbers to confirm factory hardware compatibility before ordering.

Installation

The TCJL-14 is a moderate-difficulty installation estimated at approximately 4.5 hours for a mechanically experienced DIYer. Drilling is required, and additional wiring for the license plate light must be completed as part of the install. The carrier features hidden wiring channels and zip-tie tabs to keep all wiring clean and routed neatly. A full PDF installation guide is available for download directly from DV8 Offroad's website. Professional installation is recommended if you are not comfortable with drilling into body panels or running new wiring.

Is this CARB compliant? This product is a mechanical/structural accessory and is not subject to CARB emissions regulations. However, it does carry a California Prop 65 chemical exposure warning as noted above.

Does this carrier work with aftermarket rear bumpers? Yes — as a body-mounted carrier, the TCJL-14 mounts to the vehicle body independent of the rear bumper, making it compatible with most factory and aftermarket rear bumper configurations.