DV8 Offroad OE Plus Series Steel Front Bumper Jeep Wrangler JL Gladiator JT | FBJL-13

Overview

The DV8 Offroad OE Plus Series Front Bumper (FBJL-13) is the ultimate steel front bumper upgrade for the 2018–2026 Jeep Wrangler JL and 2020–2025 Jeep Gladiator JT — engineered for Jeep owners who demand serious trail protection without abandoning their rig's factory-inspired look. Built from precision-formed 3mm and 5mm heavy-duty steel and finished in a durable micro-texture black powder coat, this bumper seamlessly blends rugged performance with OE styling. Whether you're rock crawling, overlanding, or daily driving, the best front bumper for a Jeep Wrangler JL should offer versatile configuration, winch-readiness, and integrated lighting support — and the FBJL-13 delivers on all three.

Key Features & Benefits

• Heavy-Duty 3mm & 5mm Steel Construction — Precision-formed dual-gauge steel provides superior front-end protection against rocks, branches, and trail obstacles, offering a massive upgrade over the factory plastic bumper.
• Removable Wings for Full-Width or Stubby Configuration — Easily switch between full-width mode for maximum side protection or a stubby setup that adds approach-angle clearance on technical rock crawling trails — all without tools.
• Removable Steel Bull Bar — The included steel bull bar adds an extra layer of grille and winch protection. Remove it anytime to retain a cleaner, more factory-stock appearance.
• Recessed Winch Mount with Cover Plate — The integrated winch mounting platform supports your recovery needs while its recessed design promotes increased airflow to the engine. A removable winch plate cover provides a finished look when no winch is installed, keeping mud and debris out of the cavity.
• Dual Light Mounts for Pods or OEM Fog Lights — Two integrated light mounts accept (2) 3-inch pod lights or DV8's JL & JT 4-inch LED Fog Lights, and the bumper is designed to retain compatibility with the factory fog lights on equipped Wrangler JL and Gladiator JT trims.
• Light Bar Ready — Compatible with DV8's Elite Series Light Bar Mount to support a 13-inch Elite Series LED Single Row Light Bar above the bull bar, or a 20-inch LED Single Row Light Bar below the bull bar for maximum trail illumination.
• OEM Tow Hook Compatible — Retains compatibility with the factory tow hooks on equipped vehicles, preserving your Jeep's recovery points without modification.
• Micro-Texture Black Powder Coat Finish — The corrosion-resistant, scratch-resistant powder coat finish accents the exterior styling of your JL or JT while standing up to harsh off-road environments and weather exposure.
• CARB Compliant — Emissions compliance verified; no CARB acknowledgment required.
• One-Year Limited Warranty — Backed by DV8 Offroad's one-year limited warranty against defects in workmanship and materials from the date of purchase.

What's Included

• 1x OE Plus Series Steel Front Bumper Shell
• 1x Removable Steel Bull Bar / Hoop
• 1x Pair of Removable Side Wings
• 1x Removable Winch Plate Cover
• Hardware & Mounting Kit

Specifications

Manufacturer Part #	FBJL-13
Brand	DV8 Offroad
UPC	810087815707
Material	Heavy-Duty Steel (3mm & 5mm precision-formed)
Finish	Micro-Texture Black Powder Coat
Configuration	Full-Width or Stubby (Removable Wings)
Bull Bar	Included, Removable Steel
Winch Mount	Recessed, Integrated (Winch Sold Separately)
Light Mounts	(2) Mounts for 3" Pod Lights or DV8 4" LED Fog Lights
Light Bar Compatibility	DV8 13" or 20" Elite Series LED Single Row (Mount Sold Separately)
Tow Hook Compatibility	OEM Tow Hooks (on equipped vehicles)
Dimensions (L x W x H)	54 x 19 x 11 in
CARB Compliant	Yes
Warranty	1-Year Limited
Factory Fog Light Compatible	Yes (JL & JT factory fog lights)
Front Skid Plate Compatible	No — Not compatible with factory front skid plate (DV8 Sway Bar Disconnect Skid Plate recommended)

Fitment & Compatibility

The DV8 Offroad FBJL-13 OE Plus Front Bumper is a direct bolt-on fitment for the following vehicles:

• 2018–2026 Jeep Wrangler JL (All trims: Sport, Sport S, Sahara, Rubicon — 2-door & Unlimited 4-door)
• 2020–2025 Jeep Gladiator JT (All trims: Sport, Sport S, Overland, Rubicon, Mojave)

Important Notes:

• This bumper is NOT compatible with the factory front skid plate. DV8's Sway Bar Disconnect Skid Plate is recommended as a replacement.
• The bull bar and/or winch may obstruct the forward-facing camera on vehicles equipped with front cameras (e.g., ParkSense or off-road camera systems).
• Compatible with OEM factory fog lights on equipped JL and JT models. Rubicon models with the Steel Bumper Group may have fitment nuances — consult DV8 Offroad directly for confirmation.
• Minor trimming may be required during installation depending on trim level.

Frequently Asked Questions

Is the FBJL-13 winch-ready out of the box?

Yes. The bumper features a fully integrated, recessed winch mount. When no winch is installed, the included winch plate cover snaps in to provide a clean, debris-free finish.

Can I run my factory fog lights with this bumper?

Yes. The FBJL-13 is designed to accommodate the factory fog lights from the Jeep Wrangler JL and Gladiator JT on equipped vehicles.

Is this bumper CARB compliant?

Yes. This product is CARB approved and does not require a CARB acknowledgment at the time of purchase.

Does the bumper fit both 2-door and 4-door Wrangler models?

Yes. The FBJL-13 fits both the 2-door Wrangler JL and the 4-door Wrangler JL Unlimited.

Installation

The DV8 Offroad OE Plus Front Bumper FBJL-13 is designed as a bolt-on direct replacement for the factory bumper using existing factory mounting points — no major welding or fabrication required. The estimated installation time is approximately 4 hours, though this may vary depending on installer experience and vehicle configuration. Minor trimming may be required on some trim levels. A professional installation is recommended for those not comfortable with suspension or body modifications. An official installation guide PDF is available from DV8 Offroad's website. Note: We recommend a dry-fit of all components prior to final torquing, and review all included spacers before mounting a winch.