DV8 Offroad MTO Series Rear Bumper Jeep Wrangler JL JLU | RBJL-13

Overview

The DV8 Offroad MTO (Made To Overland) Series Rear Bumper (RBJL-13) is a heavy-duty steel rear bumper purpose-built for 2018–2026 Jeep Wrangler JL and JLU owners who demand serious off-road protection without sacrificing factory functionality. Constructed from laser-cut cold rolled steel and finished in a micro-texture black powder coat, this full-width bumper delivers trail-proven durability and an aggressive overland aesthetic. Whether you're rock crawling, overlanding, or daily driving your JL, the RBJL-13 is the ideal upgrade that retains all OEM convenience features while dramatically enhancing rear-end capability.

Key Features & Benefits

• 3/16" Laser-Cut Cold Rolled Steel Construction — Military-grade material thickness provides maximum impact resistance and long-term corrosion protection for even the most punishing trail conditions.
• Full-Width Design with Tapered Wings — Seamlessly integrates with both factory and aftermarket fender flares for a clean, factory-finished appearance at any trim level.
• OEM Spare Tire Mount — Up to 37" Clearance — The factory spare tire mounting point accommodates tires up to 37 inches tall, giving overlanders the ability to run larger rubber without purchasing an aftermarket carrier.
• Factory Hitch & Harness Retention — Retains full use of the OEM receiver hitch and trailer wiring harness, so you never lose towing capability.
• Parking Sensor Compatible with Cutouts — Pre-cut sensor ports maintain full functionality of factory backup/parking sensors. Sensor plugs are included for non-sensor-equipped Wranglers.
• Dual (2) 3" Light Pod Mounts — Two integrated light pod mounting positions behind the perforated aluminum accent panels support supplemental trail lighting, wired to reverse lights or a separate switch.
• Dual 1" Thick Clevis D-Ring Mounts — Two heavy-duty 1-inch thick clevis mounts are compatible with standard 3/4-inch D-ring shackles, providing reinforced recovery attachment points when you need them most.
• License Plate Relocation Bracket & Light Included — Moves your license plate clear of the spare tire swing area while keeping it illuminated and visible — fully street legal.
• Welded Interior Zip-Tie Tabs — Factory-style wire management tabs are welded inside the bumper for a clean, rattle-free lighting and sensor wire routing.
• Optional MTO Tire Carrier Upgrade — Compatible with DV8 Offroad TCJL-13 Bumper-Mounted MTO Tire Carrier (sold separately) for a full overland-ready swing-away spare tire solution.
• Micro-Texture Black Powder Coat Finish — Durable textured coating resists chips, UV fading, and corrosion while complementing any JL color scheme.
• Lifetime Structural Warranty — Backed by DV8 Offroad's lifetime structural warranty, giving you peace of mind on every adventure.

What's Included

• RBJL-13 MTO Series Rear Bumper (1-Piece)
• Perforated Aluminum Accent Panels (2)
• 1" Thick Clevis D-Ring Mounts (2)
• License Plate Relocation Bracket
• License Plate Light
• Parking Sensor Port Plugs (for non-sensor models)
• All Necessary Mounting Hardware
• Installation Guide (also available at dv8offroad.com)

Specifications

Part Number	RBJL-13
Brand	DV8 Offroad
Series	MTO (Made To Overland)
Material	3/16" (3.5mm & 5mm) Laser-Cut Cold Rolled Steel
Finish	Micro-Texture Black Powder Coat
Design	Full-Width, 1-Piece
D-Ring Mount Thickness	1-Inch Thick Clevis (3/4" D-Ring Compatible)
Light Pod Mounts	2x 3" Pod Light Mounts
Max Spare Tire Size	Up to 37"
Weight	78.0 lbs
Package Dimensions	71"L × 17"W × 11"H
UPC	810087812966
Warranty	Lifetime Structural
Prop 65	⚠️ California Proposition 65 Warning applies — see P65Warnings.ca.gov

Fitment & Compatibility

The DV8 Offroad RBJL-13 MTO Series Rear Bumper is a direct-fit application for the following vehicles:

• 2018–2026 Jeep Wrangler JL (2-Door)
• 2018–2026 Jeep Wrangler JLU (4-Door Unlimited)

Compatible with factory and aftermarket fender flares. Works with OEM parking sensor systems (sensor relocation kit MPRSNSR-01 recommended for optimal sensor fitment). Compatible with DV8 Offroad TCJL-13 Bumper-Mounted MTO Tire Carrier (sold separately) for a swing-away spare tire setup.

Installation

The RBJL-13 is a direct-fit, bolt-on installation requiring no drilling. All necessary mounting hardware is included. Estimated installation time is approximately 3 hours with light-to-moderate mechanical skill. Minor wiring may be required for license plate light and optional light pod connections. A professional installation is recommended to ensure proper fitment and sensor calibration. A full installation guide PDF is available for download at dv8offroad.com.

Frequently Asked Questions

Will this bumper work with my factory parking sensors?
Yes. The RBJL-13 includes pre-cut sensor port cutouts to retain full parking sensor functionality. If your JL does not have factory sensors, plugs are included to fill the openings.

Can I run a 37-inch spare tire with this bumper?
Yes. The factory OEM spare tire mount accommodates tires up to 37 inches in height on stock wheels and mounting hardware.

Does this bumper retain the factory trailer hitch?
Yes. The MTO Series design specifically retains use of the OEM receiver hitch and trailer wiring harness.

Is a tire carrier included?
No. The RBJL-13 bumper is tire-carrier-capable but does not include one. The compatible DV8 Offroad TCJL-13 Bumper-Mounted MTO Tire Carrier is available separately.

Is this bumper CARB compliant?
This is a steel bumper/structural accessory and is not subject to CARB emissions regulations. However, a California Proposition 65 (Prop 65) warning applies to this product due to the presence of certain chemicals in the materials.