DV8 Offroad FS-7 Mid-Width Winch Front Bumper Jeep Wrangler JL & Gladiator JT | FBJL-07

Overview

The DV8 Offroad FS-7 Mid-Width Winch Front Bumper (FBJL-07) is a trail-proven, heavy-duty steel front bumper engineered specifically for the 2018–2023 Jeep Wrangler JL and 2020–2023 Jeep Gladiator JT. A modern remake of DV8's iconic FS-7 design, this bumper delivers the ideal balance of high-clearance rock crawling geometry, winch capability, and aggressive styling — making it one of the best mid-width front bumpers for Jeep Wrangler JL and Gladiator JT builds. Whether you're a weekend warrior or a serious trail runner, the FS-7 is built to perform when and where it matters most.

Key Features & Benefits

• High-Clearance Mid-Width Design — Strikes the perfect balance between full frontal protection and maximum approach angle, giving you the confidence to tackle steep inclines and rock obstacles without compromise. Optimized for use with aftermarket fenders.
• Recessed Winch Tray — The low-profile, recessed winch mount keeps your winch tucked tight to the bumper for a clean, streamlined look while accommodating a wide range of winch sizes for versatile recovery options.
• Integrated Bull Bar — A fully welded bull bar sits in front of the winch, shielding your winch and grille from trail debris, brush, and light impacts without adding unnecessary bulk.
• Dual D-Ring Recovery Mounts — Features two 1"-thick welded D-ring mounts that accept 7/8" shackle pins, providing reliable, high-strength recovery anchor points in any off-road situation.
• 20" Light Bar Mount — Centered light mount is compatible with a dual-row 20" light bar (including DV8 Elite Series 20" dual row, Baja Designs 20" single row, and Rigid 20" single row — sold separately), plus each wing accommodates a 3" pod light for complete trail illumination.
• Heavy-Duty Steel Construction with Micro-Texture Powder Coat — Built from heavy-duty steel and finished with a corrosion-resistant micro-texture black powder coat, this bumper is engineered to withstand the abuse of harsh off-road environments while resisting rust, scratches, and UV damage.
• Integrated Wire Management — Welded-in zip tie tabs keep winch and lighting wiring neatly routed and secured, so your build looks as clean as it performs.
• Bolt-On Direct Fitment — Designed as a direct bolt-on replacement with no cutting or modifications required. Fits all JL and JT trims straight from the box.

What's Included

• (1) FS-7 Mid-Width Winch Front Bumper
• (2) D-Ring Shackle Mounts (1" thick, for 7/8" shackle pins)
• All required mounting hardware
• DV8 Offroad Installation Guide (PDF also available at dv8offroad.com)

Specifications

Manufacturer Part #	FBJL-07
Brand	DV8 Offroad
UPC	810087812577
Bumper Style	Mid-Width
Material	Heavy-Duty Steel
Finish	Micro-Texture Black Powder Coat
Winch Tray	Recessed; accepts multiple winch sizes
D-Ring Mounts	(2) 1" thick mounts for 7/8" shackle pins
Light Bar Mount	20" dual-row center mount + (2) 3" pod light wing mounts
Fairlead Compatibility	Hawse/Pocket style ONLY — NOT compatible with roller fairleads
Factory Skid Plate Compatible	No — factory skid plate must be removed
Factory Fog Light Compatible	No — factory fog lights are not retained
CARB Compliant	Yes
Warranty	1 Year Limited (DV8 Offroad)
Estimated Install Time	~3 Hours

Fitment & Compatibility

The DV8 Offroad FBJL-07 FS-7 Mid-Width Winch Front Bumper is designed for direct bolt-on fitment on the following vehicles:

• 2018–2023 Jeep Wrangler JL (all trims, including Sport, Sahara, Rubicon, and 4xe)
• 2020–2023 Jeep Gladiator JT (all trims)

Important Fitment Notes: This bumper fits all JL and JT trims but is not compatible with the factory OEM skid plate or factory fog lights, which must be removed prior to installation. This bumper pairs well with aftermarket fenders. A hawse or pocket-style fairlead is required if running a winch — traditional roller-style fairleads are not compatible.

Is this bumper compatible with the Jeep Wrangler JK? The FBJL-07 is optimized for the JL platform (2018–2023). For JK fitment, please see the DV8 Offroad FBSHTB-07 or verify compatibility with a JK-to-JL adapter bracket.

Installation

The FS-7 Mid-Width Front Bumper is a fully bolt-on installation that uses your Jeep's factory mounting locations — no cutting, welding, or permanent modifications required. A second person is recommended to assist with lifting and aligning the bumper. Estimated installation time is approximately 3 hours and may vary based on experience level. A downloadable PDF installation guide is available directly from DV8 Offroad. For optimal results, remove the factory bumper, skid plate, and fog lights before beginning installation.