DV8 Offroad FS-1 Series Stubby Front Bumper Jeep Wrangler JL & Gladiator JT | FBJL-11

Overview

The DV8 Offroad FS-1 Series Stubby Front Bumper (FBJL-11) is a purpose-built, winch-ready steel front bumper engineered for serious off-road performance on the 2007–2026 Jeep Wrangler JK/JL and Gladiator JT. Designed to maximize approach angle clearance, integrate trail recovery gear, and support supplemental lighting, this is one of the best stubby front bumpers for Jeep Wrangler JK, JL, and Gladiator JT rock crawlers and trail riders. Built from heavy-gauge steel with a durable micro-texture black powder coat finish, the FS-1 Series delivers the aggressive look and trail-proven toughness that Jeep enthusiasts demand.

Key Features & Benefits

• High-Clearance Stubby Design – Shortened end caps dramatically improve approach angles for rock crawling and steep obstacle navigation, reducing the chance of hang-ups on technical terrain.
• Recessed Winch Tray – Accepts multiple winch sizes in a recessed mounting position behind the protective tubular bull bar, keeping your recovery gear protected and centered.
• 1-Inch Thick D-Ring Mounts – Heavy-duty integrated D-ring shackle mounts accept ⅞-inch shackle pins, providing reliable recovery anchor points when you need them most.
• Inset 20" LED Light Bar Mount – Center-mounted light bar cutout is compatible with the DV8 Elite 20" Dual Row, Baja Designs 20" Single Row, and Rigid 20" Single Row light bars — amber and clear lens compatible.
• Heavy-Gauge Steel Construction – Fabricated from 3.5mm and 5mm steel plate for maximum rigidity and protection against trail impacts without unnecessary bulk.
• Gusseted Bull Bar – The support tube bull bar design features internal gusseting for extra structural strength and safety, protecting both the winch and grille area.
• OEM Sensor Retention – Bumper design integrates your Jeep's factory OEM sensors so they retain full functionality after installation.
• Micro-Texture Black Powder Coat Finish – Both the bumper body and protective bull bar are finished in a durable micro-texture black powder coat for a long-lasting, corrosion-resistant appearance that looks great on the trail or the street.
• Completely Bolt-On Installation – No cutting, welding, or permanent modifications required. Hardware included for a clean factory-location install.
• Hawse Fairlead Compatible – Note: This bumper is not compatible with roller fairleads. A hawse-style (iron/steel) fairlead is recommended when running a steel cable winch.

What's Included

• FS-1 Series Stubby Front Bumper (FBJL-11)
• Integrated recessed winch tray plate
• 1-inch D-ring shackle mounts (2x)
• All mounting hardware and installation fasteners

Specifications

Manufacturer Part #	FBJL-11
SKU	dveFBJL-11
UPC	810087812652
Brand	DV8 Offroad
Series	FS-1 Series
Style	Stubby / High-Clearance
Material	3.5mm & 5mm Steel Plate
Finish	Micro-Texture Black Powder Coat
Light Bar Compatibility	20" Dual/Single Row (DV8 Elite, Baja Designs, Rigid)
Winch Compatibility	Accepts multiple winch sizes (recessed tray)
D-Ring Mount Thickness	1 inch (accepts ⅞" shackle pins)
Fairlead Compatibility	Hawse-style only (NOT compatible with roller fairleads)
OEM Sensor Compatible	Yes
Adaptive Cruise Control Compatible	Yes
OEM Skid Plate Compatible	No
OEM Fog Lights Compatible	No
Installation Type	Bolt-On (no cutting or welding)
Estimated Install Time	~3 hours (assistance required)
Warranty	1-Year Limited Manufacturer Warranty
California Prop 65	WARNING: See Prop 65 notice below

California Prop 65 Warning: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Fitment & Compatibility

The DV8 Offroad FBJL-11 FS-1 Series Stubby Front Bumper is designed to fit the following vehicles:

• 2007–2018 Jeep Wrangler JK (2-Door)
• 2007–2018 Jeep Wrangler Unlimited JKU (4-Door)
• 2018–2026 Jeep Wrangler JL (2-Door)
• 2018–2026 Jeep Wrangler Unlimited JLU (4-Door)
• 2020–2026 Jeep Gladiator JT

Important Fitment Notes:

• A JK-to-JL Front Bumper Bracket (adapter) is required to install this bumper on a Wrangler JL or Gladiator JT. This adapter is sold separately.
• Gladiator Mojave owners: When paired with a winch, partial obstruction of the front trail camera may occur due to the recessed winch tray design and winch motor housing height.
• This bumper is not compatible with roller fairleads. Use a hawse-style fairlead when running a steel cable winch.

Frequently Asked Questions

Is this bumper compatible with adaptive cruise control?
Yes. The FS-1 Series bumper is compatible with Jeep adaptive cruise control systems.

Will this bumper work with OEM fog lights?
No. The FS-1 Series stubby design does not accommodate factory OEM fog lights. Aftermarket lighting via the 20" light bar mount is recommended.

What winch sizes fit the FBJL-11?
The recessed winch tray accepts multiple winch sizes. A hawse-style fairlead is required; roller fairleads are not compatible.

Does this bumper retain factory sensors?
Yes. OEM sensors are integrated into the bumper design and retain full functionality.

Installation

The DV8 Offroad FS-1 Series Front Stubby Bumper is a fully bolt-on installation using factory mounting locations — no drilling, cutting, or welding required. All mounting hardware is included. Due to the bumper's weight, a second person is strongly recommended for safe removal and installation. Estimated installation time is approximately 3 hours, though time may vary based on experience level. A JK-to-JL bumper bracket adapter (sold separately) is required for JL Wrangler and Gladiator JT fitment. An official installation guide (PDF) is available from DV8 Offroad at dv8offroad.com.