DV8 Offroad Front Door Pocket MOLLE Panels Jeep Wrangler JL & Gladiator JT | MPJL-05

Overview

The DV8 Offroad Front Door Pocket MOLLE Panels (MPJL-05) are a purpose-built, rigid steel upgrade engineered to permanently replace the weak, saggy factory door pocket netting found in 2018–2026 Jeep Wrangler JL and 2020–2026 Gladiator JT models. Designed for overlanders, off-road enthusiasts, and daily drivers who demand smarter in-cabin organization, these panels transform dead pocket space into a fully modular, tactical gear-mounting platform. With a forward-protruding water bottle pocket, MOLLE webbing, and a snap-in locking design, the MPJL-05 is the definitive door storage upgrade for the JL and JT platform.

Key Features & Benefits

• Rigid 2mm Steel Construction — Replaces the OEM's flimsy, stretch-prone door net with a solid steel panel built to withstand daily use and trail abuse without sagging or deforming.
• Full MOLLE Panel System — The integrated MOLLE webbing design allows for endless customization with compatible pouches, holsters, knife sheaths, med kits, tools, and radios (sold separately), keeping your essential gear organized and within arm's reach.
• Front-Protruding Water Bottle Pocket — The intelligently designed front panel protrudes outward to create dedicated space for a standard water bottle, flashlight, or similarly sized items — a feature the OEM net simply cannot provide.
• Snap-In Design with Locking Tabs — A secure, tool-minimized snap-in system with locking tabs holds the panel firmly in place without requiring removal of the inner door panel, and allows for easy removal when needed.
• Micro-Texture Black Powder Coat Finish — The durable, textured black powder coat is both corrosion-resistant and aesthetically complementary to the Jeep JL/JT interior styling for a clean, factory-integrated appearance.
• No Permanent Modifications — Retains the factory door pocket trim structure. The panel tabs slide behind the existing plastic for a secure, non-destructive fit.
• 1-Year Manufacturer's Warranty — Backed by DV8 Offroad's limited 1-year warranty covering defects in workmanship and materials from the date of purchase.

What's Included

• 2x DV8 Offroad Front Door MOLLE Panel Pockets (Driver & Passenger)
• 2x Hold-Down Brackets
• Hardware Kit (uses factory door pocket screws)
• Printed Installation Manual

Specifications

Manufacturer Part #	MPJL-05
Brand	DV8 Offroad
UPC	810087813307
Material	2mm Steel
Finish	Micro-Texture Black Powder Coat
Product Weight	7.0 lbs
Package Dimensions	26"L × 8"W × 6"H
Warranty	1 Year (Defects in Material & Workmanship)
CA Prop 65	⚠️ Warning — See Prop 65 Notice Below

⚠️ California Prop 65 Warning: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Fitment & Compatibility

The DV8 Offroad MPJL-05 Front Door Pocket MOLLE Panels are designed to fit the following vehicles:

• 2018–2026 Jeep Wrangler JL (2-Door & 4-Door / JLU)
• 2020–2026 Jeep Gladiator JT

Note: These panels are for the front doors only. For rear door coverage, see the DV8 Offroad Rear Door MOLLE Panels (MPJL-06) or Slim Rear Door MOLLE Pockets (MPJL-08). For a slim front-door option without the water bottle protrusion (more legroom), see MPJL-07. Confirm your model year before purchasing — if you have a 2018 Jeep, verify whether your vehicle is a JL or JK platform.

Installation

Installation is a straightforward DIY process estimated at approximately 30 minutes and requires no door panel removal. Tools needed include a cutting tool (to remove the factory door net — cutting/removal of factory netting is required), needle-nose pliers (optional, for full elastic band removal), and a T15 Torx bit. The DV8 MOLLE pocket tabs slide behind the factory door pocket plastic trim; factory door pocket screws are then removed with a T15 Torx bit and reused with the included hold-down brackets to lock the panel flush and secure. Full step-by-step instructions and an installation video are available from DV8 Offroad. For questions, contact DV8 Offroad customer support at 855-680-9595.

Frequently Asked Questions

Will a standard water bottle fit in the front pocket?

Yes. The front protrusion on the MPJL-05 is sized to accommodate a standard water bottle or soda can.

Do I need to remove my door panel for installation?

No. The snap-in design with locking tabs installs without removing the interior door panel, significantly simplifying the process.

Is cutting required?

Yes. Cutting or removal of the factory door pocket netting is required before the MOLLE panel can be installed.

Are MOLLE pouches included?

No. MOLLE-compatible pouches, holsters, and accessories are sold separately.

Is this the same as the slim version?

No. The MPJL-05 is the standard version with a forward water bottle protrusion. For a slimmer profile with more legroom and no bottle protrusion, see MPJL-07.