TURN Offroad

Turn Offroad Front Bumper with Welded Bull Bar and Skid Plate for Jeep Wrangler JL and Gladiator JT

SKU: torJPFB-04



Overview

A hard-use front bumper built around a welded bull bar, integrated skid plate, and winch-ready center section. The welded 3 mm tube bar is fixed and rigid, with no bolt-on flex, and the tight footprint with angled corners is made for rocky terrain. This bumper intentionally has no fog light provisions, for a simpler layout focused on clearance, recovery, and protection.

Key Features

  • High-clearance footprint with angled corners for rocky terrain
  • Welded 3 mm tube bull bar, fixed to the bumper with no bolt-on flex
  • Reinforced center section and fairlead slot for standard winches up to 12,000 lb
  • Welded, ventilated skid plate integrated into the bumper structure
  • Dual 1-inch-thick D-ring tabs for 3/4-inch shackles. Note: this bumper has no fog light provisions

Fitment

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models (also fits 2007-2018 Jeep Wrangler JK). Built from 3-5 mm steel plate with a Tri-Guard textured black powder coat finish. Includes the bumper, welded bull bar, skid plate, and hardware. Approximate install time is 3 hours.

Complete the Setup

  • Winch, if yours does not include one: size it at 1.5 times your Jeep's loaded weight. A 9,500 to 12,000 lb winch covers most JLs, with 12,000 lb the pick for a loaded 4-door on 37s. Synthetic line is lighter and safer if it breaks, steel cable shrugs off abrasion on rocks. Jeep JL Recovery Winches
  • Mounting: a winch needs a winch-ready bumper or a winch mount tray. Check the bumper's winch size and bolt pattern before you buy, and plan on wiring straight to the battery.
  • Fairlead to match the line: a hawse fairlead for synthetic line, a roller fairlead for steel cable. A line dampener and a wireless remote are worth adding from day one.
  • Recovery gear to use it with: rated 3/4 in D-ring shackles, a tree trunk protector, a snatch block to double the pull, a kinetic rope, traction boards, and a compressor to air back up. Jeep JL Recovery Gear
  • Lights and wiring: if the bumper has light mounts, plan the pods or light bar and the wiring at the same time as the winch, so you only pull the bumper once. If it is a rear bumper with a tire carrier, check it is rated for your spare size.
View full product details
$749.99
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

A hard-use front bumper built around a welded bull bar, integrated skid plate, and winch-ready center section. The welded 3 mm tube bar is fixed and rigid, with no bolt-on flex, and the tight footprint with angled corners is made for rocky terrain. This bumper intentionally has no fog light provisions, for a simpler layout focused on clearance, recovery, and protection.

Key Features

  • High-clearance footprint with angled corners for rocky terrain
  • Welded 3 mm tube bull bar, fixed to the bumper with no bolt-on flex
  • Reinforced center section and fairlead slot for standard winches up to 12,000 lb
  • Welded, ventilated skid plate integrated into the bumper structure
  • Dual 1-inch-thick D-ring tabs for 3/4-inch shackles. Note: this bumper has no fog light provisions

Fitment

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models (also fits 2007-2018 Jeep Wrangler JK). Built from 3-5 mm steel plate with a Tri-Guard textured black powder coat finish. Includes the bumper, welded bull bar, skid plate, and hardware. Approximate install time is 3 hours.

Complete the Setup

  • Winch, if yours does not include one: size it at 1.5 times your Jeep's loaded weight. A 9,500 to 12,000 lb winch covers most JLs, with 12,000 lb the pick for a loaded 4-door on 37s. Synthetic line is lighter and safer if it breaks, steel cable shrugs off abrasion on rocks. Jeep JL Recovery Winches
  • Mounting: a winch needs a winch-ready bumper or a winch mount tray. Check the bumper's winch size and bolt pattern before you buy, and plan on wiring straight to the battery.
  • Fairlead to match the line: a hawse fairlead for synthetic line, a roller fairlead for steel cable. A line dampener and a wireless remote are worth adding from day one.
  • Recovery gear to use it with: rated 3/4 in D-ring shackles, a tree trunk protector, a snatch block to double the pull, a kinetic rope, traction boards, and a compressor to air back up. Jeep JL Recovery Gear
  • Lights and wiring: if the bumper has light mounts, plan the pods or light bar and the wiring at the same time as the winch, so you only pull the bumper once. If it is a rear bumper with a tire carrier, check it is rated for your spare size.

Turn Offroad Front Bumper with Welded Bull Bar and Skid Plate for Jeep Wrangler JL and Gladiator JT

$749.99