Synergy Mfg

Synergy Heavy Duty Steering Kit for Jeep Wrangler JL and Gladiator JT

SKU: syn8825-00



Complete bolt-on replacement for the factory JL / JT steering linkage, built around a heavy duty drag link and a heat treated chromoly tie rod with forged, greaseable, metal on metal tie rod ends. Length adjustments are made with Synergy's Double Adjuster Sleeve and Pinch Bolt Assembly instead of jam nuts. Compatible with stock wheels, tires and knuckles and with right hand drive models. A drag link flip is supported with a flip adapter; high steer setups need 3 inch bump stop spacers, a front track bar relocation bracket and proper wheel backspacing, and are not recommended under 3 inches of lift.

Key Features

  • Drag link made from 1.50 inch x .250 wall USA made DOM tubing
  • Tie rod made from 1.50 inch x .188 wall heat treated 4130 chromoly, formed after heat treating
  • Forged Synergy tie rod ends, metal on metal and fully greaseable, with 4140 steel shank, 1018 steel bearing housing and NBR boot with retaining ring
  • Single plane tie rod ends
  • Double Adjuster Sleeve and Pinch Bolt Assembly, no jam nuts
  • Fully welded pinch bolt housings
  • Two stage abrasion resistant powder coat finish
  • 100 percent bolt-on, compatible with stock wheels, tires and knuckles, RHD compatible
  • Reusing the stock stabilizer or 1/2 inch bolt stabilizers requires the 8807-03 Steering Stabilizer Relocation Kit
  • Fox TS / ATS stabilizers require clamp 4050-50 and clamp adapter 4051-01
  • Replacement ends: drag link 4162-L (driver) and 4163-L (passenger); tie rod 4163-L (driver) and 4164-L (passenger)

Includes

  • (1) 8800-01 Heavy Duty Drag Link, (1) 8802-11 Heavy Duty Tie Rod

Fitment

2018+ Jeep Wrangler JL / JLU, 2020+ Jeep Gladiator JT

View full product details
$1,025
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Complete bolt-on replacement for the factory JL / JT steering linkage, built around a heavy duty drag link and a heat treated chromoly tie rod with forged, greaseable, metal on metal tie rod ends. Length adjustments are made with Synergy's Double Adjuster Sleeve and Pinch Bolt Assembly instead of jam nuts. Compatible with stock wheels, tires and knuckles and with right hand drive models. A drag link flip is supported with a flip adapter; high steer setups need 3 inch bump stop spacers, a front track bar relocation bracket and proper wheel backspacing, and are not recommended under 3 inches of lift.

Key Features

  • Drag link made from 1.50 inch x .250 wall USA made DOM tubing
  • Tie rod made from 1.50 inch x .188 wall heat treated 4130 chromoly, formed after heat treating
  • Forged Synergy tie rod ends, metal on metal and fully greaseable, with 4140 steel shank, 1018 steel bearing housing and NBR boot with retaining ring
  • Single plane tie rod ends
  • Double Adjuster Sleeve and Pinch Bolt Assembly, no jam nuts
  • Fully welded pinch bolt housings
  • Two stage abrasion resistant powder coat finish
  • 100 percent bolt-on, compatible with stock wheels, tires and knuckles, RHD compatible
  • Reusing the stock stabilizer or 1/2 inch bolt stabilizers requires the 8807-03 Steering Stabilizer Relocation Kit
  • Fox TS / ATS stabilizers require clamp 4050-50 and clamp adapter 4051-01
  • Replacement ends: drag link 4162-L (driver) and 4163-L (passenger); tie rod 4163-L (driver) and 4164-L (passenger)

Includes

  • (1) 8800-01 Heavy Duty Drag Link, (1) 8802-11 Heavy Duty Tie Rod

Fitment

2018+ Jeep Wrangler JL / JLU, 2020+ Jeep Gladiator JT

Synergy Heavy Duty Steering Kit for Jeep Wrangler JL and Gladiator JT

$1,025