Synergy Heavy Duty Ball Joint Set of 4, Non-Knurled, for Jeep Wrangler JL and Gladiator JT
SKU: syn4170-60
Synergy MFG Heavy Duty Ball Joint Kit for the Jeep JL / JLU Wrangler and JT Gladiator. These ball joints use a metal on metal bearing design, unlike the factory plastic nylon bearing design, to improve durability, longevity, and performance, and to get rid of steering wander and play caused by loose or worn out ball joints. Jeep updated the JL / JLU and JT steering knuckle to use a dual load bearing upper and lower ball joint, but kept the problematic nylon inner liner which is prone to premature wear. Synergy's Heavy Duty Ball Joints use the latest metal on metal design from their other ball joint applications. Non-knurled ball joints are the correct choice when replacing stock or non-knurled ball joints; knurled ball joints are required only when replacing ball joints that have enlarged the axle end forging bores.
Key Features
- Fully greaseable metal on metal design for prolonged life
- High carbon alloy 1045 steel ball joint housing provides a smooth bearing surface and robust design
- Ball joint bearing race is manufactured from sintered graphite and oil impregnated bronze for a strong, smooth bearing surface
- Ball joint stud is manufactured from induction heat treated 4140 Chromoly steel for maximum strength and reliability
- Ball joint dust boots are made from an industrial grade, wear and tear resistant black nitro-butyl rubber (NBR)
- Compatible with all aftermarket axle shafts (including RCV) with no modifications needed
- Fully greaseable metal on metal ball joint bearing surface has considerably larger area than stock due to elimination of the inner nylon liner, for a longer lasting joint
- Heavy duty, heat treated stud prevents unwanted movement and premature failure
- Improves road manners and corrects sloppy steering
- 12 Month Unlimited Warranty
- Metal on metal ball joints require a small break-in period of typically 100-500 miles to fully seat the bearing surfaces
- Synergy High Performance Grease (4119) recommended
Includes
- (2) Non-Knurled Upper Ball Joints and (2) Non-Knurled Lower Ball Joints. Set of 4 ball joints to service both sides of one Jeep JL / JLU / JT.
Fitment
2018-2024 Jeep JL / JLU / JT, per the fitment table on Synergy's Heavy Duty Ball Joint Kits page. 4170-60 is the non-knurled set of 4: (2) Non-Knurled Upper Ball Joints and (2) Non-Knurled Lower Ball Joints, servicing both sides of one vehicle.
Synergy MFG Heavy Duty Ball Joint Kit for the Jeep JL / JLU Wrangler and JT Gladiator. These ball joints use a metal on metal bearing design, unlike the factory plastic nylon bearing design, to improve durability, longevity, and performance, and to get rid of steering wander and play caused by loose or worn out ball joints. Jeep updated the JL / JLU and JT steering knuckle to use a dual load bearing upper and lower ball joint, but kept the problematic nylon inner liner which is prone to premature wear. Synergy's Heavy Duty Ball Joints use the latest metal on metal design from their other ball joint applications. Non-knurled ball joints are the correct choice when replacing stock or non-knurled ball joints; knurled ball joints are required only when replacing ball joints that have enlarged the axle end forging bores.
Key Features
- Fully greaseable metal on metal design for prolonged life
- High carbon alloy 1045 steel ball joint housing provides a smooth bearing surface and robust design
- Ball joint bearing race is manufactured from sintered graphite and oil impregnated bronze for a strong, smooth bearing surface
- Ball joint stud is manufactured from induction heat treated 4140 Chromoly steel for maximum strength and reliability
- Ball joint dust boots are made from an industrial grade, wear and tear resistant black nitro-butyl rubber (NBR)
- Compatible with all aftermarket axle shafts (including RCV) with no modifications needed
- Fully greaseable metal on metal ball joint bearing surface has considerably larger area than stock due to elimination of the inner nylon liner, for a longer lasting joint
- Heavy duty, heat treated stud prevents unwanted movement and premature failure
- Improves road manners and corrects sloppy steering
- 12 Month Unlimited Warranty
- Metal on metal ball joints require a small break-in period of typically 100-500 miles to fully seat the bearing surfaces
- Synergy High Performance Grease (4119) recommended
Includes
- (2) Non-Knurled Upper Ball Joints and (2) Non-Knurled Lower Ball Joints. Set of 4 ball joints to service both sides of one Jeep JL / JLU / JT.
Fitment
2018-2024 Jeep JL / JLU / JT, per the fitment table on Synergy's Heavy Duty Ball Joint Kits page. 4170-60 is the non-knurled set of 4: (2) Non-Knurled Upper Ball Joints and (2) Non-Knurled Lower Ball Joints, servicing both sides of one vehicle.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Skyjacker
Skyjacker 2-2.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Jeep Wrangler JL 2-Door Rubicon 4WD

Skyjacker
Skyjacker 1.5 in. Dual Rate-Long Travel Lift Kit System with Black MAX Shocks Wrangler JL Diesel 4-Door 4WD

Skyjacker
Skyjacker Rear Dual Rate Long Travel Coil Springs 3.5 inch Lift Jeep Wrangler JL Rubicon 2 Door

Skyjacker
Skyjacker 1.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Wrangler JL Diesel 4-Door Rubicon 4WD

Skyjacker
Skyjacker 2.5 in. Dual Rate-Long Travel Lift Kit System with Black MAX Shocks Wrangler JL Diesel 4-Door Rubicon 4WD

Skyjacker
Skyjacker 1.5 in. Dual Rate-Long Travel Lift Kit System with Black MAX Shocks Wrangler JL Diesel 4-Door Rubicon 4WD

Old Man Emu
Old Man Emu BP-51 Rear Shock Mount Kit

Old Man Emu
Old Man Emu BP-51 High-Performance Front Shock for 2.5-3.5" Lift

Skyjacker
Skyjacker Rear Dual Rate Long Travel Coil Springs 2 inch Lift Jeep Wrangler JL Rubicon 2 Door

Skyjacker
Skyjacker 1.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Wrangler JL Diesel 4-Door 4WD
Synergy Heavy Duty Ball Joint Set of 4, Non-Knurled, for Jeep Wrangler JL and Gladiator JT




