Synergy Mfg

Synergy Front Lift Coil Springs, 5 Inch (4 Door) / 6 Inch (2 Door) Lift, for Jeep Wrangler JL and Gladiator JT

SKU: syn8863-50



Synergy designed these front lift coil springs from a clean slate specifically for the Jeep JL / JLU / JT platform, accounting for its weight distribution and suspension geometry rather than reusing springs from another platform. The true multi-rate design uses a softer initial rate that transitions to a slightly firmer ride rate than stock, supporting the extra weight of bumpers, winches, skid plates, and gear without sacrificing comfort or control. Longer free length keeps the coils seated at full droop in long travel setups. Springs are corner specific so the vehicle sits level, work with up to 3/4 inch of front spacer lift without additional bump stop spacing, and are manufactured in the USA from premium high strength steel, pre-set to prevent sagging and designed to cycle to full compression without overstressing the material.

Key Features

  • Multi-rate coil springs allow for longer spring lengths and increased travel
  • Spring rates are only 5-10 percent stiffer than stock for superior ride quality
  • Coil spring block heights designed around common bump stop spacings to optimize wheel travel
  • Ground and closed lower spring ends to prevent bowing
  • Includes front lower coil spring isolators to match the ground and closed spring ends
  • Unique spring lengths for each corner of the vehicle so it will sit level side to side
  • Frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
  • Sold in pairs
  • Lifetime warranty and guarantee against sagging and breakage
  • Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers

Includes

  • Sold in pairs. Pair of front coil springs (corner specific, unique left and right lengths) plus included front lower coil spring isolators matched to the ground and closed spring ends.

Fitment

Jeep Wrangler JL / JLU and Jeep Gladiator JT (2018 and up platform). Per Synergy fitment table for 8863-50: 5 inch lift on 4-door models, 6 inch lift on 2-door models. Spring rate 115/120 lb/in (initial/ride rate). Minimum bump stop spacing 4 inches. Lift heights are based off fully loaded Rubicon 3.6L models with HD front and rear bumpers, winch, and full size spare; other models will see more lift.

View full product details
$320
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Synergy designed these front lift coil springs from a clean slate specifically for the Jeep JL / JLU / JT platform, accounting for its weight distribution and suspension geometry rather than reusing springs from another platform. The true multi-rate design uses a softer initial rate that transitions to a slightly firmer ride rate than stock, supporting the extra weight of bumpers, winches, skid plates, and gear without sacrificing comfort or control. Longer free length keeps the coils seated at full droop in long travel setups. Springs are corner specific so the vehicle sits level, work with up to 3/4 inch of front spacer lift without additional bump stop spacing, and are manufactured in the USA from premium high strength steel, pre-set to prevent sagging and designed to cycle to full compression without overstressing the material.

Key Features

  • Multi-rate coil springs allow for longer spring lengths and increased travel
  • Spring rates are only 5-10 percent stiffer than stock for superior ride quality
  • Coil spring block heights designed around common bump stop spacings to optimize wheel travel
  • Ground and closed lower spring ends to prevent bowing
  • Includes front lower coil spring isolators to match the ground and closed spring ends
  • Unique spring lengths for each corner of the vehicle so it will sit level side to side
  • Frequency balanced and tuned spring rates to maximize suspension performance on and off road
  • Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
  • Sold in pairs
  • Lifetime warranty and guarantee against sagging and breakage
  • Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers

Includes

  • Sold in pairs. Pair of front coil springs (corner specific, unique left and right lengths) plus included front lower coil spring isolators matched to the ground and closed spring ends.

Fitment

Jeep Wrangler JL / JLU and Jeep Gladiator JT (2018 and up platform). Per Synergy fitment table for 8863-50: 5 inch lift on 4-door models, 6 inch lift on 2-door models. Spring rate 115/120 lb/in (initial/ride rate). Minimum bump stop spacing 4 inches. Lift heights are based off fully loaded Rubicon 3.6L models with HD front and rear bumpers, winch, and full size spare; other models will see more lift.

Synergy Front Lift Coil Springs, 5 Inch (4 Door) / 6 Inch (2 Door) Lift, for Jeep Wrangler JL and Gladiator JT

$320