Synergy Front Lift Coil Springs, 2 Inch (4 Door) / 3 Inch (2 Door) Lift, for Jeep Wrangler JL and Gladiator JT
SKU: syn8863-20
Synergy designed these front lift coil springs from a clean slate specifically for the Jeep JL / JLU / JT platform, accounting for its weight distribution and suspension geometry rather than reusing springs from another platform. The true multi-rate design uses a softer initial rate that transitions to a slightly firmer ride rate than stock, supporting the extra weight of bumpers, winches, skid plates, and gear without sacrificing comfort or control. Longer free length keeps the coils seated at full droop in long travel setups. Springs are corner specific so the vehicle sits level, work with up to 3/4 inch of front spacer lift without additional bump stop spacing, and are manufactured in the USA from premium high strength steel, pre-set to prevent sagging and designed to cycle to full compression without overstressing the material.
Key Features
- Multi-rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold in pairs
- Lifetime warranty and guarantee against sagging and breakage
- Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers
Includes
- Sold in pairs. Pair of front coil springs (corner specific, unique left and right lengths) plus included front lower coil spring isolators matched to the ground and closed spring ends.
Fitment
Jeep Wrangler JL / JLU and Jeep Gladiator JT (2018 and up platform). Per Synergy fitment table for 8863-20: 2 inch lift on 4-door models, 3 inch lift on 2-door models. Spring rate 110/120 lb/in (initial/ride rate). Minimum bump stop spacing 2 inches. Lift heights are based off fully loaded Rubicon 3.6L models with HD front and rear bumpers, winch, and full size spare; other models will see more lift.
Synergy designed these front lift coil springs from a clean slate specifically for the Jeep JL / JLU / JT platform, accounting for its weight distribution and suspension geometry rather than reusing springs from another platform. The true multi-rate design uses a softer initial rate that transitions to a slightly firmer ride rate than stock, supporting the extra weight of bumpers, winches, skid plates, and gear without sacrificing comfort or control. Longer free length keeps the coils seated at full droop in long travel setups. Springs are corner specific so the vehicle sits level, work with up to 3/4 inch of front spacer lift without additional bump stop spacing, and are manufactured in the USA from premium high strength steel, pre-set to prevent sagging and designed to cycle to full compression without overstressing the material.
Key Features
- Multi-rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold in pairs
- Lifetime warranty and guarantee against sagging and breakage
- Coil springs require proper bump stop spacing with Synergy 8057-10 Bump Stop Spacers
Includes
- Sold in pairs. Pair of front coil springs (corner specific, unique left and right lengths) plus included front lower coil spring isolators matched to the ground and closed spring ends.
Fitment
Jeep Wrangler JL / JLU and Jeep Gladiator JT (2018 and up platform). Per Synergy fitment table for 8863-20: 2 inch lift on 4-door models, 3 inch lift on 2-door models. Spring rate 110/120 lb/in (initial/ride rate). Minimum bump stop spacing 2 inches. Lift heights are based off fully loaded Rubicon 3.6L models with HD front and rear bumpers, winch, and full size spare; other models will see more lift.
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products

Skyjacker
Skyjacker Front Dual Rate Long Travel Coil Springs 3.5 inch Lift Jeep Wrangler JL Rubicon 2 Door

Skyjacker
Skyjacker Front Dual Rate Long Travel Coil Springs 2 inch Lift Jeep Wrangler JL 2 Door

Skyjacker
Skyjacker 1.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Wrangler JL Diesel 4-Door 4WD

Skyjacker
Skyjacker Rear Dual Rate Long Travel Coil Springs 2 inch Lift Jeep Wrangler JL Rubicon 2 Door

Skyjacker
Skyjacker 2.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Wrangler JL Diesel 4-Door 4WD

Skyjacker
Skyjacker Front Dual Rate Long Travel Coil Springs 5 inch Lift Jeep Wrangler JL Rubicon 2 Door

Skyjacker
Skyjacker 2.5 in. Dual Rate-Long Travel Lift Kit System with M95 Shocks Wrangler JL Diesel 4-Door Rubicon 4WD

Skyjacker
Skyjacker 6-Inch Front Dual Rate Long Travel Coil Springs Jeep Wrangler JL 2-Door Non-Rubicon (Pair) | JL60FDR

FOX
Fox JM92 Advanced Suspension Fluid - 1 Quart

ARB
ARB Coil Spring Packer Rear
Synergy Front Lift Coil Springs, 2 Inch (4 Door) / 3 Inch (2 Door) Lift, for Jeep Wrangler JL and Gladiator JT



