Spectre

Spectre Performance Air Intake Kit 9089, Polished Aluminum Tube with Red Filter, Jeep Wrangler JL 2018-2027 and Gladiator JT 2020-2026, 3.6L V6

SKU: spe9089



Overview

The Spectre Performance 9089 is a complete air intake kit for the 3.6L V6 Jeep Wrangler JL and Gladiator JT. It replaces the factory air box and intake tube with a polished aluminum intake tube, a black powder-coated heat shield that keeps heated engine air away from the inlet, and a red Spectre low-restriction air filter that is washable and reusable.

Spectre designs its intake systems to get more horsepower and torque from the engine while protecting it from harmful debris. Spectre does not publish a kit-specific horsepower or torque figure for the 9089, and this listing does not invent one. The kit was designed and tested on a stock engine and needs no custom tuning.

Key Features

  • Polished aluminum intake tube
  • Black powder-coated heat shield to help prevent heated engine air from entering the intake inlet
  • Red low-restriction air filter: non-woven synthetic media, oiled, washable and reusable
  • Velocity air funnel adapter included
  • Designed and tested on a stock engine; no tune required
  • Replacement filter is Spectre HPR9891

What's Included

  • Intake tube
  • Cone air filter, 8.5 in, red
  • Heat shield
  • Flex coupler, 3 in
  • Coupler, 3 in
  • Velocity air funnel
  • Edge trim, 47 in
  • 4 clamps, #48
  • Grommet, 1 in
  • Rubber mounted stud
  • 2 air box mount stand-offs
  • Mounting bolts, washers, and nylock nut

Specifications

Part number 9089
Engine 3.6L V6
Tube Polished aluminum
Heat shield Black powder-coated
Filter Red, non-woven synthetic, oiled, washable and reusable
Replacement filter Spectre HPR9891
CARB status Not CARB legal (no CARB EO for this kit)
UPC 089601008783

Installation

Bolt-on replacement for the factory air box and intake tube, following Spectre's instruction sheet: disconnect the negative battery terminal, remove the factory air box and tube, transfer the factory inlet air temperature sensor into the Spectre tube with the provided grommet, fit the edge trim to the heat shield, mount the heat shield on the provided studs, connect the tube with the provided couplers and clamps, reconnect the crankcase vent line and the sensor, then fit the filter. Tools required: flat blade screwdriver, ratchet, extension, 10mm socket, and 13mm deep socket.

Fitment

Per Spectre's product page for this kit: Jeep Wrangler 2018-2027 with the 3.6L V6, and Jeep Gladiator 2020-2026 with the 3.6L V6, all models. (Spectre's instruction sheet for the kit states the Wrangler range as 2018-2026; the product page is the broader of Spectre's two statements.)

California warning: this kit is not CARB certified and is not legal for sale or use in California on any pollution-controlled motor vehicle. It carries no CARB executive order number.

Warranty

Covered by Spectre's 90-day limited warranty.

FAQs

Q: How much power does this intake add?

Spectre does not publish a kit-specific horsepower or torque estimate for the 9089, so there is no manufacturer figure to quote. The kit's job is a less restrictive, cooler intake path; any seller quoting a specific dyno number for this kit is not quoting Spectre.

Q: Is it legal in California?

No. The 9089 is not CARB certified and is not legal for sale or use in California on pollution-controlled vehicles.

Q: Does it need a tune?

No. Spectre designed and tested the kit on a stock engine with no custom tuning.

Q: How do I service the filter?

The red filter is washable and reusable. When it is eventually time to replace it, the replacement is Spectre part HPR9891.

View full product details
$188.99
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The Spectre Performance 9089 is a complete air intake kit for the 3.6L V6 Jeep Wrangler JL and Gladiator JT. It replaces the factory air box and intake tube with a polished aluminum intake tube, a black powder-coated heat shield that keeps heated engine air away from the inlet, and a red Spectre low-restriction air filter that is washable and reusable.

Spectre designs its intake systems to get more horsepower and torque from the engine while protecting it from harmful debris. Spectre does not publish a kit-specific horsepower or torque figure for the 9089, and this listing does not invent one. The kit was designed and tested on a stock engine and needs no custom tuning.

Key Features

  • Polished aluminum intake tube
  • Black powder-coated heat shield to help prevent heated engine air from entering the intake inlet
  • Red low-restriction air filter: non-woven synthetic media, oiled, washable and reusable
  • Velocity air funnel adapter included
  • Designed and tested on a stock engine; no tune required
  • Replacement filter is Spectre HPR9891

What's Included

  • Intake tube
  • Cone air filter, 8.5 in, red
  • Heat shield
  • Flex coupler, 3 in
  • Coupler, 3 in
  • Velocity air funnel
  • Edge trim, 47 in
  • 4 clamps, #48
  • Grommet, 1 in
  • Rubber mounted stud
  • 2 air box mount stand-offs
  • Mounting bolts, washers, and nylock nut

Specifications

Part number 9089
Engine 3.6L V6
Tube Polished aluminum
Heat shield Black powder-coated
Filter Red, non-woven synthetic, oiled, washable and reusable
Replacement filter Spectre HPR9891
CARB status Not CARB legal (no CARB EO for this kit)
UPC 089601008783

Installation

Bolt-on replacement for the factory air box and intake tube, following Spectre's instruction sheet: disconnect the negative battery terminal, remove the factory air box and tube, transfer the factory inlet air temperature sensor into the Spectre tube with the provided grommet, fit the edge trim to the heat shield, mount the heat shield on the provided studs, connect the tube with the provided couplers and clamps, reconnect the crankcase vent line and the sensor, then fit the filter. Tools required: flat blade screwdriver, ratchet, extension, 10mm socket, and 13mm deep socket.

Fitment

Per Spectre's product page for this kit: Jeep Wrangler 2018-2027 with the 3.6L V6, and Jeep Gladiator 2020-2026 with the 3.6L V6, all models. (Spectre's instruction sheet for the kit states the Wrangler range as 2018-2026; the product page is the broader of Spectre's two statements.)

California warning: this kit is not CARB certified and is not legal for sale or use in California on any pollution-controlled motor vehicle. It carries no CARB executive order number.

Warranty

Covered by Spectre's 90-day limited warranty.

FAQs

Q: How much power does this intake add?

Spectre does not publish a kit-specific horsepower or torque estimate for the 9089, so there is no manufacturer figure to quote. The kit's job is a less restrictive, cooler intake path; any seller quoting a specific dyno number for this kit is not quoting Spectre.

Q: Is it legal in California?

No. The 9089 is not CARB certified and is not legal for sale or use in California on pollution-controlled vehicles.

Q: Does it need a tune?

No. Spectre designed and tested the kit on a stock engine with no custom tuning.

Q: How do I service the filter?

The red filter is washable and reusable. When it is eventually time to replace it, the replacement is Spectre part HPR9891.

Spectre Performance Air Intake Kit 9089, Polished Aluminum Tube with Red Filter, Jeep Wrangler JL 2018-2027 and Gladiator JT 2020-2026, 3.6L V6

$188.99