RockJock

RockJock Johnny Joint Rear Lower Control Arms CE-9807RLA, Adjustable, Jeep Wrangler JL and JK, Does Not Fit Gladiator JT

SKU: rokCE-9807RLA



Overview

The RockJock CE-9807RLA control arms are built around Johnny Joints at both ends, with length adjustment to dial in pinion angle and caster on a lifted Jeep. The Johnny Joint is a steel ball pivoting inside a proprietary urethane shell, giving over 30 degrees of articulation per joint with quiet, shock-dampening movement and none of the deflection of a rubber flex joint. The joints are greasable via zerk fittings and rebuildable, and they take non-synthetic hi-moly grease only, such as RockJock CE-9013G.

The arms are fabricated from 1 5/8 in. x .250 in. wall DOM steel tubing with 2 1/2 in. Johnny Joints and 1 1/4 in.-12 RH thread adjusters.

The arms wear a semi-gloss black powder coat finish with gold zinc plating on the Johnny Joint adjuster ends (steel arms), and factory mounting hardware is retained.

Key Features

  • Johnny Joints at both ends, greasable and rebuildable
  • Over 30 degrees of articulation per joint
  • Length adjustable for pinion angle and caster correction
  • Semi-gloss black powder coat with gold zinc plated adjuster ends
  • Rebuild kit: CE-9110RK; pivot ball: CE-91102; Johnny Joint tool: CE-9110T

What's Included

  • Johnny Joint control arms, pair (CE-9807RLA). Factory mounting hardware is retained.

Specifications

Part number CE-9807RLA
Joints 2 1/2 in. Johnny Joints
Arm tubing 1 5/8 in. x .250 in. wall DOM steel
Adjuster thread 1 1/4 in.-12 RH
Adjustment range 19.915 in. closed to 21.295 in. extended

Installation

Bolt-on in place of the factory arms using the retained factory hardware, then set length for pinion angle and caster and have the Jeep aligned. Grease the joints with non-synthetic hi-moly grease only (RockJock CE-9013G).

Fitment

Fits Jeep Wrangler JL and JL Unlimited AND Jeep Wrangler JK and JK Unlimited, all models. Per RockJock, these arms do NOT fit the Jeep Gladiator JT.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Are the Johnny Joints serviceable?

Yes. They are greasable via zerk fittings and rebuildable with kit CE-9110RK and the CE-9110T Johnny Joint tool.

Q: What grease should I use?

Non-synthetic hi-moly grease only, such as RockJock CE-9013G.

View full product details
$490
In Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

The RockJock CE-9807RLA control arms are built around Johnny Joints at both ends, with length adjustment to dial in pinion angle and caster on a lifted Jeep. The Johnny Joint is a steel ball pivoting inside a proprietary urethane shell, giving over 30 degrees of articulation per joint with quiet, shock-dampening movement and none of the deflection of a rubber flex joint. The joints are greasable via zerk fittings and rebuildable, and they take non-synthetic hi-moly grease only, such as RockJock CE-9013G.

The arms are fabricated from 1 5/8 in. x .250 in. wall DOM steel tubing with 2 1/2 in. Johnny Joints and 1 1/4 in.-12 RH thread adjusters.

The arms wear a semi-gloss black powder coat finish with gold zinc plating on the Johnny Joint adjuster ends (steel arms), and factory mounting hardware is retained.

Key Features

  • Johnny Joints at both ends, greasable and rebuildable
  • Over 30 degrees of articulation per joint
  • Length adjustable for pinion angle and caster correction
  • Semi-gloss black powder coat with gold zinc plated adjuster ends
  • Rebuild kit: CE-9110RK; pivot ball: CE-91102; Johnny Joint tool: CE-9110T

What's Included

  • Johnny Joint control arms, pair (CE-9807RLA). Factory mounting hardware is retained.

Specifications

Part number CE-9807RLA
Joints 2 1/2 in. Johnny Joints
Arm tubing 1 5/8 in. x .250 in. wall DOM steel
Adjuster thread 1 1/4 in.-12 RH
Adjustment range 19.915 in. closed to 21.295 in. extended

Installation

Bolt-on in place of the factory arms using the retained factory hardware, then set length for pinion angle and caster and have the Jeep aligned. Grease the joints with non-synthetic hi-moly grease only (RockJock CE-9013G).

Fitment

Fits Jeep Wrangler JL and JL Unlimited AND Jeep Wrangler JK and JK Unlimited, all models. Per RockJock, these arms do NOT fit the Jeep Gladiator JT.

Warranty

Covered by RockJock's 2-year limited warranty. John Currie Performance Group, Inc. DBA RockJock warrants RockJock-manufactured items to the original purchaser, with proof of purchase, against defects in materials and workmanship for 2 years from the stated delivery date on the invoice. Alteration or improper use voids the warranty, and damage caused by abuse, incorrect installation, competition use, or failure of non-RockJock components is not covered. Liability is limited to repair, replacement, or upgrade of the product at RockJock's discretion, and the warranty is not transferable.

FAQs

Q: Are the Johnny Joints serviceable?

Yes. They are greasable via zerk fittings and rebuildable with kit CE-9110RK and the CE-9110T Johnny Joint tool.

Q: What grease should I use?

Non-synthetic hi-moly grease only, such as RockJock CE-9013G.

RockJock Johnny Joint Rear Lower Control Arms CE-9807RLA, Adjustable, Jeep Wrangler JL and JK, Does Not Fit Gladiator JT

$490