ORACLE Lighting Flush Mount Tinted LED Tail Lights Jeep Gladiator JT | 5882-504-T

Overview

The ORACLE Lighting V2 Flush Mount LED Tail Lights (Part# 5882-504-T) are a purpose-built, OEM+ tail light assembly engineered specifically for the 2020–2026 Jeep Gladiator JT. Featuring a blacked-out tinted lens and a low-profile wrap-around design, these lights deliver a clean, modern aesthetic upgrade while adding premium LED performance that the factory lights simply can't match. Whether you're a daily driver or a trail-ready off-road enthusiast, these are the best flush mount LED tail lights for the Jeep Gladiator JT on the market.

Key Features & Benefits

• Blacked-Out Tinted Lens ("Black Series") – Smoked, tinted lens delivers a stealthy, aggressive appearance while maintaining full, DOT/SAE-compliant LED output — no performance compromise for style.
• Flush-Mount, Low-Profile OEM+ Design – Wraps tightly around the truck bed corners, protruding significantly less than factory tail lights to reduce the risk of trail damage and deliver a sleeker, more purposeful look.
• Wrap-Around Visibility – The nearly flush contoured profile keeps rear lighting visible from virtually any angle, improving both safety and road presence.
• Signature Perimeter Lighting – Premium LED outline gives your Gladiator a distinctive, modern appearance day or night, far exceeding factory styling.
• 10 High-Powered Reverse LEDs – Dramatically brighter than stock, providing real illumination when backing up on the trail, at the campsite, or in a dark parking lot.
• Factory Blind Spot / Cross-Traffic Sensor Compatible – The OEM cross-traffic sensor transfers directly from your factory assembly into the ORACLE housing. No adapters, no workarounds — seamless integration.
• True Plug-and-Play Installation – Uses OEM connectors for a clean, no-cut, no-drill install compatible with both base and LED factory packages.
• IP67 Water & Dust Resistant – Weather-sealed polycarbonate housing is fully rated for rain, dust, mud, and typical off-road conditions.
• V2 Double-Diffusion Architecture – The upgraded V2 design features a double-diffusion optical system for smoother, more uniform light output across the entire lens face.
• DOT / SAE Compliant – Fully street-legal right out of the box. No modifications needed for road use.
• 2-Year Warranty – Backed by ORACLE Lighting's industry-leading 2-year warranty coverage for peace of mind.
• Patented Design – Protected by Domestic Patent D1007014 and International Patent ZL202130597903.3.

What's Included

• (1) Pair of ORACLE Flush Mount LED Tail Lights for Jeep Gladiator JT — Tinted Lens
• (1) Online Installation Instruction Guide
• Resistors included where applicable for halogen-equipped vehicles

Specifications

Manufacturer Part #	5882-504-T
UPC	810030398578
Lens Color	Tinted / Smoked (Black Series)
Housing Color	Black
Housing Construction	Weather-Sealed Polycarbonate
Waterproof Rating	IP67 (Water & Dust Resistant)
Light Source	LED
Functions	Brake / Turn Signal / Reverse / Running Lights
Reverse LEDs	10 High-Powered LEDs
Optical Design	V2 Double-Diffusion Architecture
Sensor Compatibility	Factory Blind Spot / Cross-Traffic Sensor Transfer
Install Type	Plug-and-Play (OEM Connectors)
Estimated Install Time	15–30 Minutes
Weight	4.35 lbs per Pair
Compliance	DOT / SAE Compliant; CARB Compliant
Warranty	2 Years
Domestic Patent	D1007014
International Patent	ZL202130597903.3
Sold As	Pair (Left & Right)

Fitment & Compatibility

Designed exclusively for 2020–2026 Jeep Gladiator JT — All North American Trims, including:

• Sport
• Sport S
• Overland
• Rubicon
• Rubicon X
• Mojave
• Mojave X
• Willys
• Willys Sport
• High Altitude
• Texas Trail
• High Tide
• NightHawk
• 4xe
• 80th Anniversary Edition

Compatible with both base halogen and factory LED lighting packages. Supports factory blind spot / cross-traffic sensor transfer with no additional adapters required. Note: Designed for North American market Gladiator JT models. Factory halogen-equipped Jeeps may require a small inline resistor (included where applicable) or a compatible programmer (e.g., J-scan or Tazer) if reverse park lights shut off after extended use. Not intended for European or export-market Gladiators without additional modules.

Installation

Installation is a straightforward bolt-in replacement requiring no cutting, drilling, or permanent wiring modifications. The true plug-and-play design uses OEM connectors that connect directly to your Gladiator's factory tail light harness. If your Gladiator is equipped with the optional factory blind spot / cross-traffic sensor, it transfers cleanly from your factory assembly directly into the ORACLE housing — no adapters needed. Most DIY-capable Jeep owners can complete the full installation in approximately 15–30 minutes using basic hand tools. An online installation guide is included with purchase. For halogen-equipped Gladiators, use the included resistors or a compatible programmer if needed to prevent park light shutoff.

Frequently Asked Questions

Are these CARB compliant? Yes, these ORACLE Lighting tail lights are CARB compliant.

Are these DOT / SAE compliant and street legal? Yes, these lights are fully DOT and SAE compliant and are street-legal out of the box in all 50 states.

Do these work with my factory blind spot monitor? Yes. The factory cross-traffic sensor transfers directly from your OEM assembly into the ORACLE housing with no adapters required.

Will these cause a hyper-flash or dashboard warning light? For most LED-equipped Gladiators, no. Halogen-equipped models may require an inline resistor (included where applicable) or a compatible programmer to prevent park light shutoff.

What is the difference between the Standard Red (5882-504) and Tinted (5882-504-T) versions? The tinted version features a smoked black lens for a blacked-out, aggressive aesthetic while maintaining full, identical LED lighting performance. The standard red version features a clear red lens for a more traditional look.