Injen SES High Tuck Axle-Back Exhaust System (Polished) - 2018-2025 Jeep Wrangler JL
SKU: injSES5006AB
Injen High Tuck Axle-Back Exhaust for Jeep Wrangler JL
Upgrade your Jeep Wrangler JL with the Injen SES5006AB High Tuck Axle-Back Exhaust System. Engineered with 100% 304 stainless steel and Injen's signature high tuck design, this exhaust sits high and tight inside the chassis to maximize ground clearance while delivering a deep, aggressive exhaust note and dyno-proven performance gains.
Dyno-Proven Performance
Dyno-tested to deliver +8 horsepower and +8 lb-ft of torque over stock, the SES5006AB gives your Wrangler noticeably improved throttle response both on the highway and on the trail.
High Tuck Design for Maximum Ground Clearance
The high tuck configuration positions the entire exhaust assembly high and inside the frame rails, dramatically improving approach and departure angles. Crawl over rocks and navigate steep obstacles without worrying about exhaust damage — exactly what a Jeep exhaust should do.
Premium 304 Stainless Steel Construction
- 100% 304 stainless steel — far superior corrosion resistance vs. 409 grade
- CNC mandrel-bent tubing — smooth bends maintain unrestricted exhaust flow
- Robotic TIG welding — precision welds for maximum durability
- Low-profile oval muffler — straight-through flow design for a clean, aggressive tone
- 4" polished tip — bolt-on design with embossed Injen badge
Bolt-On Installation — No Cutting or Welding
The SES5006AB bolts directly to your factory mid-pipe with all required hardware included. Most installations take 1–2 hours with basic hand tools. Rated intermediate difficulty.
Vehicle Fitment
- 2018–2025 Jeep Wrangler JL — 2-door and 4-door Unlimited
- 3.6L V6 Pentastar
- 2.0L Turbo 4-cylinder
What's in the Box
- Axle-back exhaust pipe assembly (3" mandrel-bent 304 SS)
- Low-profile oval muffler
- 4" bolt-on polished exhaust tip with Injen badge
- All required installation hardware and gaskets
- Installation instructions
Proudly Made in the USA
Designed and manufactured at Injen Technology's facility in Pomona, California.
Injen High Tuck Axle-Back Exhaust for Jeep Wrangler JL
Upgrade your Jeep Wrangler JL with the Injen SES5006AB High Tuck Axle-Back Exhaust System. Engineered with 100% 304 stainless steel and Injen's signature high tuck design, this exhaust sits high and tight inside the chassis to maximize ground clearance while delivering a deep, aggressive exhaust note and dyno-proven performance gains.
Dyno-Proven Performance
Dyno-tested to deliver +8 horsepower and +8 lb-ft of torque over stock, the SES5006AB gives your Wrangler noticeably improved throttle response both on the highway and on the trail.
High Tuck Design for Maximum Ground Clearance
The high tuck configuration positions the entire exhaust assembly high and inside the frame rails, dramatically improving approach and departure angles. Crawl over rocks and navigate steep obstacles without worrying about exhaust damage — exactly what a Jeep exhaust should do.
Premium 304 Stainless Steel Construction
- 100% 304 stainless steel — far superior corrosion resistance vs. 409 grade
- CNC mandrel-bent tubing — smooth bends maintain unrestricted exhaust flow
- Robotic TIG welding — precision welds for maximum durability
- Low-profile oval muffler — straight-through flow design for a clean, aggressive tone
- 4" polished tip — bolt-on design with embossed Injen badge
Bolt-On Installation — No Cutting or Welding
The SES5006AB bolts directly to your factory mid-pipe with all required hardware included. Most installations take 1–2 hours with basic hand tools. Rated intermediate difficulty.
Vehicle Fitment
- 2018–2025 Jeep Wrangler JL — 2-door and 4-door Unlimited
- 3.6L V6 Pentastar
- 2.0L Turbo 4-cylinder
What's in the Box
- Axle-back exhaust pipe assembly (3" mandrel-bent 304 SS)
- Low-profile oval muffler
- 4" bolt-on polished exhaust tip with Injen badge
- All required installation hardware and gaskets
- Installation instructions
Proudly Made in the USA
Designed and manufactured at Injen Technology's facility in Pomona, California.
| Material | 100% 304 Stainless Steel |
|---|---|
| Pipe Diameter | 3.00" (76mm) |
| Muffler Tubing | 63mm 304 SS Mandrel-Bent |
| Tip Size | 4" Bolt-On with Injen Badge |
| Exhaust Type | Single Axle-Back |
| Exit Location | Rear Passenger Side (High Tuck Turndown) |
| Muffler Type | Low-Profile Oval, Straight-Through Flow |
| Finish | Polished Stainless Steel |
| Construction | CNC Mandrel-Bent, Robotic TIG Welded |
| Weight | ~25 lbs |
| HP Gain | +8 HP |
| Torque Gain | +8 lb-ft |
| Fitment | 2018-2025 Jeep Wrangler JL (2-door & 4-door) |
| Engine Compatibility | 3.6L V6 Pentastar, 2.0L Turbo I4 |
| Country of Origin | USA |
Reviews unavailable.
Shipping Policy Import Image Racing LLC 3200 Hanson St, Fort Myers, FL 33916 Phone: 941-257-9618 · Hours: Monday–Friday, 8am–11pm ET Import Image Racing LLC operates the following online storefronts: Maverick Division (maverickdivision.com, support@maverickdivision.com), Dirty Offroad (dirty-offroad.com), BlackLine Fab (blacklinefab.com), and FS Warehouse (fswarehouse.com). For order questions, contact the support email listed on the storefront you purchased from, or call the number above. Processing time In-stock items ordered before the shipping warehouse's same-day cutoff (shown live on each product page) ship the same business day; otherwise they ship the next business day. We ship Monday through Friday, excluding US federal holidays. Carriers and transit times We ship primarily…
Read full shipping policy →You may return most new, unused items within 30 days of delivery for a refund. Items must be uninstalled, in original packaging, and in resellable condition with all included hardware and documentation. Restocking Fee Returns may be subject to a restocking fee , deducted from your refund. Returns caused by our error (wrong or defective item shipped) are never charged a restocking fee. Return Shipping Return shipping costs are the buyer's responsibility , unless the return is due to our error. We recommend a trackable shipping method; we are not responsible for returns lost in transit. Non-Returnable Items Special order items — parts ordered specifically for you are final sale Items that have been installed, used, or modified Electrical and electronic components once opened Gift…
Read full returns policy →Dirty Offroad
Related Products
Injen
Injen Polished Power-Flow Air Intake System
Injen
Injen Evolution Cold Air Intake EVO5005 – JL/JT 3.6L Dry
Injen
Injen X-Pedal Pro Black Edition Throttle Controller 2018-2023 Jeep Wrangler JL 2.0T/3.6L
aFe
aFe MACH Force-Xp Axle-Back Exhaust System w/Black Tip 18-23 Jeep Wrangler L4-2.0T / V6-3.6L
K&N Engineering
Jeep JL 3.6 K&N Performance Air Intake System | 63-1576
aFe
aFe MACH Force-Xp 2-1/2" 409 Stainless Resonator Delete Mid-Pipe Jeep Wrangler JL 3.6L | 49-48077
Rugged Ridge
Rugged Ridge Antenna Reflex 9in
Bestop
Bestop Vinyl Soft Top Jeep Care Kit Cleaner, Protectant & Window Polish | 11215-00
Superwinch
Superwinch 90-32494 Replacement Wired Remote Control - Tiger Shark 9500/11500, LP8500/10000, UT3000 Winches
CTEK
CTEK Comfort Connect Cig Plug Battery Charger Accessory | 56-263
Injen SES High Tuck Axle-Back Exhaust System (Polished) - 2018-2025 Jeep Wrangler JL