DV8 Offroad Elite Series 20-Inch Dual Row LED Light Bar 200W 16800 Lumens | BE20EW200W

Overview

The DV8 Offroad Elite Series 20-Inch Dual Row LED Light Bar (BE20EW200W) is the go-to off-road lighting upgrade for Jeep, truck, and SUV enthusiasts who demand maximum trail visibility. Pumping out 16,800 raw lumens at 200 watts, this dual-row LED light bar pairs a flood/spot combo beam pattern with premium OSRAM LEDs for an unbeatable combination of wide-area coverage and long-range throw. Whether you're mounting it to a front bumper, hood, or bull bar, this is the best 20-inch LED light bar for serious off-road trail lighting.

Key Features & Benefits

• 16,800 Raw Lumens / 200W Output — Delivers industry-leading brightness (Lux@10M: 2,319) so you can confidently spot obstacles, trail hazards, and wildlife at distance.
• Premium OSRAM LEDs — 50,000-Hour Rated Life — Industry-grade OSRAM diodes ensure consistent, reliable output over the long haul — eliminating the cost of frequent replacements.
• Flood/Spot Combo Beam Pattern — Simultaneous wide-angle flood illumination and focused long-range spot coverage means you never have to choose between peripheral and forward lighting.
• Indirect Hooded Reflector — Focuses light in the intended direction while reducing glare and hotspots, enhancing both visibility and safety for oncoming traffic on shared trails.
• Bezel-Less Low-Profile Housing with Integrated Heat Fins — The sleek, streamlined design fits flush in tight bumper cutouts while heat fins passively dissipate ambient heat, extending LED lifespan.
• IP68-Rated Weatherproof Construction — Fully sealed against dust, dirt, sand, and water immersion — built for creek crossings, desert runs, mud pits, and everything in between.
• Shatterproof, UV-Resistant Lens — Engineered to resist cracking from trail debris and UV degradation; designed to whisk away ice and water for consistent clarity in all conditions.
• Satin Black Powder Coat Finish — Corrosion-resistant coating provides lasting durability and a rugged, low-glare appearance that complements aftermarket bumpers and grille guards.
• CARB Compliant — Meets California Air Resources Board standards for legal use across all 50 states.
• 1-Year Limited Warranty — DV8 Offroad backs this light bar against defects in workmanship and materials for one full year from date of purchase.

What's Included

• 1x DV8 Offroad 20-Inch Elite Series Dual Row LED Light Bar (BE20EW200W)
• Side-mount brackets for standard installation
• Mounting hardware

Note: A wiring harness is sold separately. For back-rail mounting, the DV8 Large Elite Series Light Bar Mounts are required and sold separately.

Specifications

Manufacturer Part #	BE20EW200W
Brand	DV8 Offroad
UPC	810087810139
Overall Length	21.5 inches
Width	2.75 inches
Height	2.65 inches
Wattage	200W
Raw Lumens	16,800
Lux @ 10M	2,319
LED Source	OSRAM LEDs
LED Lifespan	50,000 hours
Beam Pattern	Flood / Spot Combo
Housing Finish	Satin Black Powder Coat
Lens	Shatterproof, UV-Resistant
IP Rating	IP68 (Dust & Water Resistant)
Mounting Style	Side-mount (brackets included); back-rail (mounts sold separately)
CARB Compliant	Yes
Warranty	1-Year Limited

Fitment & Compatibility

The DV8 Offroad BE20EW200W is a universal-fit LED light bar designed to integrate with a wide range of aftermarket and OEM bumpers, bull bars, grille guards, and hood mounts. It is a popular choice for the following platforms (some adaptation may be required depending on mounting location):

• Jeep Wrangler JK, JL, and 4xe
• Jeep Gladiator JT
• Any vehicle with a compatible bumper cutout or light mount — see DV8 Elite Series mounting accessories for vehicle-specific solutions

Is this light bar compatible with DV8 bumpers? Yes — the BE20EW200W is purpose-built to drop into DV8 front bumper light cutouts and is a seamless match for DV8 Spec Series and Centric Series bumpers. It also fits many competing aftermarket bumpers.

Installation

The DV8 Elite Series 20-Inch LED Light Bar installs using the included side-mount brackets — no cutting or drilling required for most bumper and hood applications. For back-rail mounting configurations (e.g., on a roof rack crossbar or rear bumper rail), the DV8 Large Elite Series Light Bar Mounts are available separately. A wiring harness (also sold separately by DV8) is recommended for a clean, switch-controlled installation. Competent DIYers with basic electrical knowledge can complete the install at home; professional installation is recommended if wiring into a factory switch panel or CANBUS-controlled electrical system.

Is a wiring harness included? No — a compatible DV8 Light Wiring Harness must be purchased separately for a complete plug-and-play installation.