DV8 Offroad Spec Series Steel Rear Bumper Jeep Gladiator JT | RBGL-09

Overview

The DV8 Offroad Spec Series Rear Bumper (RBGL-09) is a purpose-built, high-clearance steel rear bumper engineered specifically for 2020–2025 Jeep Gladiator JT rock crawlers and trail enthusiasts who demand maximum departure angle and aggressive trail capability without sacrificing everyday utility. Constructed from 3.5mm/5mm steel plate with a rust-resistant micro-texture black powder coat finish and satin black aluminum accent panels, this is the best steel rear bumper upgrade for your Jeep Gladiator JT. Whether you're running Moab slickrock, desert washes, or weekend trails, the RBGL-09 delivers the protection, recovery mounting, and lighting provisions serious off-roaders require.

Key Features & Benefits

• High Clearance Rock Crawling Design — Engineered specifically for the best possible departure angle, allowing your Gladiator JT to crest ledges and navigate steep descents without dragging or catching.
• Dual 3" Pod Light Mounts — Accepts two 3-inch light pods toward either end of the bumper for supplemental trail lighting, keeping the trail lit on night runs without additional brackets.
• Two Reinforced ¾" D-Ring Clevis Mounts — Two reinforced mounting points for 3/4-inch D-ring shackles provide critical recovery options when the trail gets serious.
• Welded Interior Zip-Tie Tabs — Factory-style wire management keeps light pod and sensor wiring routed cleanly and securely inside the bumper.
• Rust-Resistant Micro-Texture Powder Coat — Durable, corrosion-resistant finish paired with satin black aluminum accent panels delivers a premium look that holds up to trail abuse.
• Factory Hitch Compatible — Designed to retain your Gladiator's OEM hitch receiver, so you don't sacrifice towing capability when you upgrade your bumper.
• High Clearance Trailer Wiring Mount — Includes a dedicated high-clearance mount to properly route and protect your trailer wiring harness connector off the trail.
• Additional Accessory Mounting Space — Expanded platform provides mounting real estate for trail essentials such as jerry cans and spare tire carriers.
• No-Drill Bolt-On Installation — Direct-fit, 100% bolt-on design requires no cutting, drilling, or modification to your Gladiator's frame or body.
• Mix & Match DV8 Ecosystem — Pairs seamlessly with any DV8 Offroad Spec Series front bumper for a cohesive, purpose-built off-road look front to rear.

What's Included

• One (1) DV8 Offroad Spec Series Steel Rear Bumper (RBGL-09)
• License plate relocation bracket
• License plate light
• High clearance trailer wiring mount
• All necessary mounting hardware

Specifications

Manufacturer Part #	RBGL-09
UPC	810087811891
Material	3.5mm / 5mm Steel Plate
Finish	Micro-Texture Black Powder Coat
Accent Panels	Satin Black Aluminum
Weight	54.50 lbs
D-Ring Shackle Size	3/4 inch
Pod Light Compatibility	Up to 3" round pod lights (qty: 2)
Fitment Type	Direct-Fit, Bolt-On (No Drilling)
Hitch Compatibility	Compatible with OEM factory hitch
CARB Compliant	Yes
Warranty	1 Year (Manufacturer Defects)
Category	Bumpers – Steel

Fitment & Compatibility

The DV8 Offroad RBGL-09 Spec Series Rear Bumper is a direct fit for the following vehicles:

• 2020 Jeep Gladiator JT (All Trims)
• 2021 Jeep Gladiator JT (All Trims)
• 2022 Jeep Gladiator JT (All Trims)
• 2023 Jeep Gladiator JT (All Trims)
• 2024 Jeep Gladiator JT (All Trims)
• 2025 Jeep Gladiator JT (All Trims)

This bumper retains compatibility with the factory OEM hitch receiver and integrates with the factory backup sensor system (sensor bezels compatible). Cross-reference OEM rear bumper assembly part numbers for your specific trim before purchase if unsure of fitment.

Installation

The RBGL-09 is a 100% bolt-on, no-drill installation designed for a direct fit to the Jeep Gladiator JT's factory mounting points. The estimated install time is approximately 3 hours, with light to moderate mechanical skill required — no professional installation necessary for most home mechanics. Begin by assembling the license plate lights and trailer connector socket into the bumper before lifting it into position. If pod lights are being installed, route and secure all wiring using the factory-style welded zip-tie tabs before mounting the bumper to the vehicle. The bumper rests on top of the factory tow hitch to aid alignment during the lift and bolt-up process. A downloadable official install guide (PDF) is available directly from DV8 Offroad.

Frequently Asked Questions

Is the DV8 RBGL-09 CARB compliant? Yes, this bumper is CARB compliant. Note: California residents should refer to Prop 65 warnings regarding material exposure.

Does this bumper work with the factory hitch? Yes — the Spec Series is specifically designed to retain and remain compatible with the Jeep Gladiator's factory OEM hitch receiver.

Will this fit my backup sensors? Yes, the bumper is designed to accommodate factory parking/backup sensors with compatible sensor bezels.

Does the RBGL-09 come with a warranty? Yes — DV8 Offroad backs this bumper with a 1-year limited warranty against manufacturer defects in workmanship and materials.