Artec Industries

Artec Rear Triangular Long Arm Suspension Bracket Upgrade, M220 Stock Axle, 4130 DOM Steel Links JT4972, Jeep Gladiator JT

SKU: artJT4972



Overview

Take your vehicle's suspension performance to the next level with Artec's new long arms, engineered for optimal ground clearance, on- and off-road maneuverability, and total control. Built to integrate seamlessly with 3-6-inch ride height components, these robust link kits deliver improved suspension cycle, precise pinion angle cycles, and an optimized roll center. The system's 1/4-inch-thick laser-cut brackets ensure a perfect fit and finish, while your choice of 7075 aluminum or DOM control arms provides superior strength, reduced weight, and cost savings.

Experience unbeatable ground clearance and on/off-road performance with Artec's new long arms, designed for 3-6-inch lifts. Engineered for optimal suspension geometry, these kits deliver durability and redefine your driving experience.

Key Features

  • Optimized Ground Clearance and Versatility
  • Engineered for superior on- and off-road performance
  • Wide Ride Height Compatibility
  • Long Arm Link Kit works seamlessly with 3-6-inch ride height components
  • Improved Suspension Geometry
  • Designed to enhance suspension cycle, pinion angle cycles, and roll center
  • Rugged, Precise Construction
  • Precision laser-cut and bent 1/4-inch-thick brackets for a perfect fit and finish
  • DOM Steel Arms
  • Fabricated 2-inch and 1.5-inch DOM control arms for excellent durability and cost savings

What's Included

  • Long arm links, 4130 DOM steel links
  • Suspension brackets
  • Hardware

Specifications

Part number JT4972
Vehicle fitment Jeep Gladiator JT
Material 4130 DOM steel

Installation

Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Gladiator JT models. Long arm kits are designed for 3 to 6 in. ride heights. 3.6L gas models only. This triangulated rear kit will NOT work on diesel JT models: Artec states the DEF tank is in the way and will not allow installation.

Warranty

The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JT4972 fit?

Fits 2020-2025 Jeep Gladiator JT models. Long arm kits are designed for 3 to 6 in. ride heights. 3.6L gas models only. This triangulated rear kit will NOT work on diesel JT models: Artec states the DEF tank is in the way and will not allow installation.

Q: What is it made from?

It is built from 4130 DOM steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.

View full product details
$1,829
Out of Stock
Secure transaction
Ships fromDirty OffroadSold byDirty OffroadReturns30-day hassle-free

Overview

Take your vehicle's suspension performance to the next level with Artec's new long arms, engineered for optimal ground clearance, on- and off-road maneuverability, and total control. Built to integrate seamlessly with 3-6-inch ride height components, these robust link kits deliver improved suspension cycle, precise pinion angle cycles, and an optimized roll center. The system's 1/4-inch-thick laser-cut brackets ensure a perfect fit and finish, while your choice of 7075 aluminum or DOM control arms provides superior strength, reduced weight, and cost savings.

Experience unbeatable ground clearance and on/off-road performance with Artec's new long arms, designed for 3-6-inch lifts. Engineered for optimal suspension geometry, these kits deliver durability and redefine your driving experience.

Key Features

  • Optimized Ground Clearance and Versatility
  • Engineered for superior on- and off-road performance
  • Wide Ride Height Compatibility
  • Long Arm Link Kit works seamlessly with 3-6-inch ride height components
  • Improved Suspension Geometry
  • Designed to enhance suspension cycle, pinion angle cycles, and roll center
  • Rugged, Precise Construction
  • Precision laser-cut and bent 1/4-inch-thick brackets for a perfect fit and finish
  • DOM Steel Arms
  • Fabricated 2-inch and 1.5-inch DOM control arms for excellent durability and cost savings

What's Included

  • Long arm links, 4130 DOM steel links
  • Suspension brackets
  • Hardware

Specifications

Part number JT4972
Vehicle fitment Jeep Gladiator JT
Material 4130 DOM steel

Installation

Artec publishes a full install guide for this product on its product page; follow it for hardware order and torque specs.

Fitment

Fits 2020-2025 Jeep Gladiator JT models. Long arm kits are designed for 3 to 6 in. ride heights. 3.6L gas models only. This triangulated rear kit will NOT work on diesel JT models: Artec states the DEF tank is in the way and will not allow installation.

Warranty

The fabricated parts in this kit are covered by Artec Industries' Limited Lifetime warranty to the original retail purchaser against defects in materials and workmanship. Hardware, joints, bushings, bearings, and moving components are covered for 12 months. Finishes and coatings are not covered for chips, scratches, fading, or normal wear. An RMA through Artec customer service is required, and remedies are repair, replacement, or store credit at Artec's option.

FAQs

Q: What does the Artec JT4972 fit?

Fits 2020-2025 Jeep Gladiator JT models. Long arm kits are designed for 3 to 6 in. ride heights. 3.6L gas models only. This triangulated rear kit will NOT work on diesel JT models: Artec states the DEF tank is in the way and will not allow installation.

Q: What is it made from?

It is built from 4130 DOM steel, per Artec.

Q: What warranty covers this part?

Limited Lifetime on fabricated parts; 12 months on hardware, joints, bushings, and moving components, per Artec.

Artec Rear Triangular Long Arm Suspension Bracket Upgrade, M220 Stock Axle, 4130 DOM Steel Links JT4972, Jeep Gladiator JT

$1,829