aFe POWER Dynamic Air Scoop D.A.S. Snorkel Jeep Gladiator Mojave | 55-21005

Overview

The aFe POWER Dynamic Air Scoop (D.A.S.) Snorkel (Part #55-21005) is a purpose-engineered snorkel system designed exclusively for the 2020–2026 Jeep Gladiator Mojave V6-3.6L — Jeep's first Desert Rated™ truck built for high-speed off-road performance in extreme heat, dust, and sand. Whether you're blasting across open terrain or crawling through deep silt beds, this snorkel helps protect your Gladiator Mojave's engine from heat soak, airborne debris, and dust ingestion. Unlike universal snorkel kits, the 55-21005 features a taller, Mojave-specific rotomolded riser engineered to perfectly match the Mojave's unique factory hood profile — delivering a factory-integrated look with genuine off-road capability.

Key Features & Benefits

• Mojave-Specific Taller Riser — Engineered with a model-specific rotomolded riser tube that perfectly follows the Gladiator Mojave's unique hood profile, ensuring precise fitment that generic snorkels can't match.
• Forward-Facing D.A.S. Inlet — The Dynamic Air Scoop inlet is optimized to deliver a steady supply of cooler, cleaner air to your engine at speed, reducing dust ingestion during high-speed desert driving.
• Mojave-Correct Orange Aluminum Bezel — Features a signature Mojave-specific 5.25" x 3.25" orange aluminum bezel that matches the OEM orange accent trim found throughout every Jeep Gladiator Mojave — purpose-built performance that looks the part.
• Fully Sealable System for Water Crossings — The sealed design allows safe water crossings when required, giving you confidence on the trail whether facing dust or deep puddles.
• No-Cut, No-Drill Cowl Pass-Through — Integrates cleanly with the factory airbox through the cowl without cutting or drilling into factory body panels, preserving your truck's structural integrity and resale value.
• 100% Reversible Installation — The entire system can be removed and the vehicle returned to stock condition if needed — no permanent modifications required.
• Removable Runner Section — The runner tube detaches quickly to give you unobstructed access to the battery and fuse box without removing the entire snorkel system.
• Integrated Drain Plug — Manage moisture accumulation inside the inlet with the built-in drain plug, helping maintain consistent airflow and long-term durability.
• Premium UV- and Heat-Resistant Materials — Rotomolded construction with premium materials engineered to withstand extreme heat, UV exposure, and the harshest off-road environments the desert can throw at it.

What's Included

• 1x Rotomold Riser Tube (Mojave-specific, taller profile)
• 1x Rotomold Runner Tube
• 1x Rotomold Adapter Tube
• 1x Silicone Reducer Coupling — 5" x 4.68" ID x 1.5" L
• 1x Silicone Elbow Reducer Coupling — 4.20" x 3.50", 66°
• 1x Orange Aluminum Snorkel Bezel — 5.25" x 3.25" (Mojave-match)
• 1x Hex Snorkel Grille — 5.25" x 3.25", Black
• Stainless steel clamp hardware set (4 clamps)
• M6 button-head socket screws (qty 4)
• Silicone drain plug with tab
• M10 flat washers
• Full aFe POWER installation instruction manual

Specifications

Brand	aFe POWER
Manufacturer Part #	55-21005
UPC	802959550595
Construction	Rotomolded Thermoplastic Tubes / Orange Aluminum Bezel
Snorkel Bezel Size	5.25" x 3.25" (Orange Aluminum)
Inlet Orientation	Forward-Facing
Overall Length	36.0 in
Overall Width	16.0 in
Overall Height	12.0 in
Weight	12.0 lbs
Intake Compatibility	Factory OEM Airbox & aFe POWER Super Stock Intake Only
CARB Status	Not CARB Legal — Not for sale in California
Emissions	No CARB EO# Required
Warranty	2-Year Limited Manufacturer's Warranty
Condition	New

Fitment & Compatibility

This snorkel is engineered exclusively for the Jeep Gladiator Mojave with the 3.6L gas V6:

• ✅ 2020–2026 Jeep Gladiator (JT) Mojave — V6-3.6L Gas

⚠️ Important Compatibility Notes:

• ❌ NOT compatible with non-Mojave Gladiator trims (use aFe #55-21001 instead)
• ❌ NOT compatible with Jeep Wrangler JL models (use aFe #55-21001 instead)
• ❌ NOT compatible with EcoDiesel-equipped Gladiators
• ❌ NOT compatible with Right-Hand Drive (RHD) vehicles
• ❌ NOT compatible with vehicles equipped with aftermarket dual battery systems
• ❌ NOT compatible with aftermarket intake systems other than the aFe POWER Super Stock intake
• ⚠️ Due to the Mojave's unique hood height and body geometry, installation on any other Gladiator model is not supported

Installation

The aFe POWER D.A.S. Snorkel is designed for straightforward DIY installation. The no-cut, no-drill cowl pass-through design integrates with the factory airbox without modifying any sheet metal or factory body panels — basic hand tools are all that's required. Installation involves removing the cowl support (6 push clips + 5 bolts), routing the snorkel tubes through the cowl, and connecting to the factory airbox with the included couplings and clamps. Most experienced installers complete the job in approximately 30 minutes to 2 hours depending on skill level. The runner section is removable post-installation for quick battery and fuse box access. Professional installation is not required, but consult the full aFe POWER instruction manual (P/N: 55-21005) before beginning.

Frequently Asked Questions

Q: Is this snorkel CARB compliant / legal in California?
A: No. This product is not CARB legal and is not for sale in California.

Q: Does it work with my aFe cold air intake?
A: This snorkel is compatible with the factory OEM airbox and the aFe POWER Super Stock intake system only. It is not compatible with other aFe intake systems or third-party aftermarket intakes.

Q: Will this fit my non-Mojave Gladiator or Wrangler JL?
A: No. This is a Mojave-exclusive snorkel due to the model's unique, taller hood height and body geometry. For non-Mojave Gladiators and Wrangler JL models, see aFe Part #55-21001.

Q: Can I still access my battery and fuse box with the snorkel installed?
A: Yes. The runner section is designed to be quickly removed for unobstructed access to the battery and fuse box without disassembling the entire system.

Q: Is the installation permanent?
A: No. The installation is fully reversible, and the vehicle can be returned to stock configuration at any time.