aFe Momentum HD Cold Air Intake Pro DRY S Jeep Wrangler JL / Gladiator JT 3.0L EcoDiesel | 50-70062D

Overview

The aFe Momentum HD Cold Air Intake System with Pro DRY S Filter (Part #50-70062D) is engineered specifically for the 2020–2023 Jeep Wrangler JL and 2021–2023 Jeep Gladiator JT equipped with the 3.0L V6 EcoDiesel engine. Designed to replace the restrictive factory airbox, this best-in-class cold air intake for the Jeep EcoDiesel delivers up to 23% more airflow, improved low-end torque, and enhanced throttle response — all with zero cutting, drilling, or ECU tuning required. Built and tested in the USA, the Momentum HD is the go-to performance upgrade for off-road enthusiasts and daily diesel drivers alike.

Key Features & Benefits

• +23% Airflow Over Factory Intake — Tested and proven to outflow the stock intake system by 23%, feeding your EcoDiesel's turbo with the volume of cool, dense air it demands on and off the trail.
• Pro DRY S 3-Layer Synthetic Filter — Oil-free, 8-inch tall, 360-degree radial flow filter with progressively finer porosity synthetic media for superior filtration without the mess of oiled filters. Washable and reusable for long-term cost savings.
• Dyno-Tuned XLPE Intake Tube — Computer-designed and dyno-tuned for maximum power gains with perfect vehicle-specific fitment. Cross-linked polyethylene (XLPE) material is heat-soak resistant and built to last in extreme conditions.
• Unique One-Piece Sealed XLPE Housing — Patent-pending filter-to-housing interface maximizes filter size inside the airbox while minimizing the number of parts, making installation fast and straightforward.
• Custom Molded EPDM Hood Seal — Soft rubber hood seal blocks hot engine air from entering the intake, ensuring cooler, denser air reaches the engine for optimal combustion efficiency.
• Built-In Clear Sight Window — Inspect the condition of your air filter at any time without disassembling the system — a practical feature for off-road and trail use.
• Silicone Coupling with Custom Aluminum Insert — Ensures proper integration with factory emissions controls for peace of mind on street-driven vehicles.
• Unique Tire Tread Design — Factory-matched fit and finish with a rugged aesthetic that complements the Wrangler and Gladiator's off-road character.
• Improved Throttle Response & Low-End Torque — Experience noticeably quicker throttle tip-in and stronger low-RPM diesel pull for towing, crawling, and highway overtaking.
• No Tune Required — This system is calibrated to your Jeep EcoDiesel's specifications straight out of the box. No ECU reflash or additional tuning needed to realize the gains.
• Made in the USA — Designed, tested, and manufactured by aFe Power (Advanced FLOW Engineering) in Corona, California.

What's Included

• (1) One-Piece Roto-Molded XLPE Sealed Housing with Built-In Sight Window
• (1) Pro DRY S 3-Layer Synthetic Air Filter (Gray, Oil-Free)
• (1) CAD-Designed, Dyno-Tuned Roto-Molded XLPE Intake Tube (Black)
• (1) Custom Molded Soft EPDM Hood Seal
• (1) Silicone Coupling with Custom Aluminum Insert
• Stainless Steel T-Bolt Clamps
• All Necessary Hardware & Mounting Fasteners
• Detailed Installation Instructions

Specifications

Manufacturer Part #	50-70062D
Brand	aFe Power (Advanced FLOW Engineering)
UPC	802959508831
Filter Type	Pro DRY S — Oil-Free Synthetic, 3-Layer
Filter Height	8 inches tall
Filter Flow Design	360-Degree Radial Flow
Filter Flange Size	4-inch round
Filter Color	Gray
Housing / Tube Material	Roto-Molded Cross-Linked Polyethylene (XLPE)
Tube Color	Black
Airflow Improvement	+23% over factory intake
Tuning Required	No
CARB Compliant	No — Not legal for sale or use in California or states adopting CARB emission standards
Country of Origin	USA
Warranty	2-Year Limited Warranty
Quantity	Sold as a complete kit

Fitment & Compatibility

This intake system is a direct fit for the following vehicles:

• 2020–2023 Jeep Wrangler JL — V6-3.0L (td) EcoDiesel (DOHC Turbocharged) — All Trim Levels (Sport, Sport S, Willys, Sahara, Rubicon, High Altitude)
• 2021–2023 Jeep Gladiator JT — V6-3.0L (td) EcoDiesel (DOHC Turbocharged) — All Trim Levels (Sport, Sport S, Overland, Rubicon, Mojave, High Altitude, Willys)

Engine: 3.0L 2987cc V6 Diesel DOHC Turbocharged | Stock Output: 260 HP @ 3,600 RPM / 442 lb-ft Torque @ 1,400 RPM

Cross-Reference OEM Application: Replaces factory Jeep EcoDiesel airbox and intake assembly on JL/JT platform vehicles.

⚠️ Emissions Notice: This product does NOT have a CARB EO number and is NOT legal for sale or use in California or any other state that has adopted California Air Resources Board (CARB) emissions standards. Intended for off-road or closed-course competition use in emissions-restricted states.

Installation

The aFe Momentum HD is a direct-fit, no-modification installation designed to use factory mounting points with no cutting or drilling required. The system's innovative one-piece housing and reduced part count make it one of the easiest performance intakes to install. Approximate install time: ~1 hour using standard hand tools. No ECU tune or recalibration is required. All T-bolt clamps, silicone couplings, and hardware are included. Full printed installation instructions are included in the kit.

Frequently Asked Questions

Is the aFe 50-70062D CARB compliant?
No. This intake does not carry a CARB EO exemption number and is not approved for sale or street use in California or CARB-adopting states. It is intended for off-road or competition use in those states.

Do I need a tune after installing this intake?
No tune is required. The Momentum HD has been engineered specifically for the 3.0L EcoDiesel and works with the factory ECU out of the box.

Is the Pro DRY S filter washable?
Yes. The Pro DRY S filter is fully washable and reusable. It is oil-free — no re-oiling is required after cleaning, making maintenance simple and mess-free.

What is the warranty on this product?
aFe Power covers this intake system with a 2-Year Limited Warranty, provided that installation and cleaning instructions are followed properly.